Search results

We all learn as we go lol. I never took any classes. Just trail and error. And maybe a chilton manual to help out a bit

Transfer case is connected to the transmission so no need for that. But once you have the skip plate off I would out one to support the transfer case just for extra protection. But shouldnt have an issue while removing the skip plate

Use jack stands and use the to support the tail of the transmission. Then just unbolt the skid plate and the transmission mount bolts and it will come down

So it wasn't to major. My friend did that to his tacoma and he needed a new engine

I had an alignment done when I bought new tires about 500 miles ago. I'll have to check the rear. The only issue they have given me is the parking brake coming out if adjustment.

I have checked all those and when I move the tire they don't move at all. So I ruled them out

I took mine out it wasn't to hard. But I had the 4 cylinder. I say just go to an autozone and tell them that you need to make template of the block off plate out of one of there manifolds. I don't see why they would say no, just ask them if you can trace it on there counter

Dang sorry to hear that. What are your plans?

I tried looking for one of those block off plates for my tj and the parts store said they don't exist. That a spot for an egr valve but jeep never placed and egr valve in any vehicle atleast that what the parts guy said. I say trace the hole out with paper and make it out of steel then when you...

Did you cross deep water with no snorkle?

have you looked into the cam position sensor? im not sure how it works but looking at the picture its like a magnet or something like that, it can easly get dirty from over the years if it was never looked at, try cleaning the deposits off and see where that gets you, as for the sound your...

If its good no need to waist money but if its bent then replace it

I looked early this morning and the wiring is connected and is in good condition

I'll be sure to look at that thank you

Ya I disconnected the battery a few days ago. Where is the cam sensor? It's in the dizzy right?

I think so

So what does 11 necessarly mean then? It starts up just fine. The light has not came on. I'm guessing its a pending code?

Today I was driving and my jeep started to stumble and seem to "skip a beat" no cel came on but decided to do the ignition trick and 3 things came which were 12 which is battery. 11 which I don't understand and 55 end of test. I have a 97 tj 2.5 with a ax-5 transmission. I checked all the...

Have you checked crankshaft sensor or cam sensor

Well if the threads/bolt is stripped you can always repair it. It beats paying 200 for an oil pan when it could be 20 bucks at a junkyard