Search results

  1. M

    What do you do?

    1073783 I manage fleet operations for a major mechanical contractor...Former GM line mechanic. skilled in mechanics, fabrication, welding, hydraulics, vehicle electrical systems, can build a good motor, and i know my way around TH series GM trannies....just don't let me get near a paint...
  2. M

    fuse trouble

    1073816 Does everything else work?? My dash lights, turn signals, brake lights and A/C blower quit on my XJ right after i got it...Had no power TO the fuses...(using a test light hooked to ground, check BOTH sides of the fuses...My problem was caused by bad connections at the ignition switch...
  3. M

    Crane Cams Camshaft

    1073819 A new cam in combination with other mods like headers and enhanced breathing will increase power...just don't install a "race" cam with big duration numbers. Long duration cams REDUCE cylinder fill efficiency at low engine speeds which kills the torque right where you need it. Sorry, i...
  4. M

    Transfer case(ouch) noise!!!

    1069481 Does it pull in 4 wheel??? if so..it may not be the t/case...a bad u-joint on the front driveshaft can raise cain too...if it pulls in 4 x 4 and the noise quits when you kick the transmission in neutral while you are moving...usually a bad u-joint...if you can grab the drive shaft with...
  5. M

    Transfer case(ouch) noise!!!

    1069542 No i couldn't feel anything...but i could sure hear it....Bounty Hunter has a valid point...i would drain the t/fer case and look for metal particles...you may be able to visually check the chain thru the fill plug....[addsig]
  6. M

    engine

    1070022 Hmmm... 4.2...sounds like a good crank and rod donor for a 4.5 stroker to me... :-D [addsig]
  7. M

    fuel pressure reg. for the weber carb

    1070024 I run my 38 at 3psi :-D [addsig]
  8. M

    Paint

    1070415 Heck, if the paint comes out bad....just keep a nice layer of mud on it!! :evil: Works for me... 8-) [addsig]
  9. M

    Gearing advice

    1053783 I have a 85 Chief... 2.5...auto trans...running 12.5 x 33's. currently with 3.73 gearing...my calculator says somewhere around 4.56 should be about right. Still flings mud pretty good in low range, but its kinda puny on the road...make that real puny..lol I use it to go puddle jumpin...
  10. M

    Parts for a NP-207

    1056821 Does anyone have info on where to get rebuild parts for a NP-207 T-fer case where i dont have to run in circles to get one item here and another item there? (other than the Jeep dealer) I have gone thru my transmission and brought it up to snuff...the T-fer case is leaking between the...
Back
Top