Search results

94ZJ rear end death wobble To all those in the Rochester (Western New York Region) area. My Jeep Cherokee is up for sale. Excellent (almost mint) condition on the exterior. Interior stripped with new floor and line-x. 4.7 stroker with gofast goodies. 4 inch lift with 33x12.50R15 tires. asking...

1064728 Easiest thing to do is get some bushwacker cut out flares. And I did Use the flare impressions as the cutting line for the front. For the rear, I simply took the flare off and cut as far as I can go without cutting the pressed metal. Right now I got bushwackers and I shouldv'e done...

1064729 In response to Jeepmaster.... Blocks are nice, yes. They provide lift, yes. But, are they reliable, NO. There are several drawbacks to blocks. (my opinion at least) 1. They can warp the leaf springs. 2. They can pop out. 3. Also, they are not as sturdy as a real lift. The whole axle...

1064730 i suggest you leave the Catalytic Converter on. Taking it off will do two things... It will make the jeep non emissions legal and eat up gas. Also, you can possibly burn and warp your valves by having a lack of backpressure. All Jeeps require a bit of backpressure. As for your gas...

1064732 Hello. Nice Jeep you got. I pulled off the list of what you want to do. And I got some names for you to look into. Engine...........4.0 I6 with K&N Cold air intake Mike Leach I-6 Headers - K&N E1796 filter fits over air hose, get thorley headers they are better...

1043585 Hahhaah. I ran through almost every system known to mankind on my Jeep. So, right now, I am running nothing (no cats too). Until I get my new motor. I wouldn't recommend this for you, since you could pay a 27,000 dollar fine. ANYWAYS.... 1. If you want noise and a nice growl. Get...

1043586 From now on.... Deer rules. When one runs in front of you, step on the gas, yes...., the gas. It will bring the front end up and possibly make you run OVER the deer. Also, if the deer hits, it will not go in the window, possibly saving your life. Trust me on this. I hit 5 deer (two of...

1043587 REmember to get the TWO CHAMBER. They give a race car sound....[addsig]

1060876 I wish I could swap out the AW4 auto in my XJ to a AX15 to handle my new stroker, but I do not have that kind of cash (4 grand estimated). I guess I will be stuck with an auto...[addsig]

1061961 I know for a fact that stock XJ's can fit 29 inch tires on. However, my personal favorite is the 255/70R15 tire with no lift. They are pretty wide and offer your Jeep a sporty look. If your suspension is shabby and drooping, better put on 235/75R15 tires on. I ran the 255's and I was...

1061963 My 95 XJ runs 4 inches of lift. I got about 4.5 inches of total lift. I had to trim a LOT, I repeat... a LOT off the fenders to fit my 33x12.50R15 Super Swamper TSLs. They measure 33.7 inches tall. I got bushwackers on there to cover them up. If I were you, I would go straight to...

1061964 My transmission is an AW4 auto. I converted into a "manual auto". I can go 1, 2, 3, and 4. However, the worst thing you can do is start in a high gear and the Jeep will strain to start off in that gear. That will create excessive and I mean excessive heat that can wipe out your...

1061967 Geez, you are all lucky. My 4.0 ran at 220 degrees and my 4.9 stroker runs at near the redline for temp. But, that's normal....[addsig]

1061968 I bet it's the flywheel.... [addsig]

1061969 My friend had that problem with his Ford Explorer, but it was with hubs. What happened was that the hub bearings in the front wheels were worn out and broken so when you turn, the bearings grind and thump. Also, it could be something with the front driveshaft... I am just guessing...

1061970 They should fit, but the ride will be extremely ROUGH!!!!! edited by: dingus, Mar 27, 2003 - 09:36 AM[addsig]

1062646 I run a 180 degree JET thermostat. I am currently looking into a GDI 3 core radiator to replace my ancient stock radiator.[addsig]

1062648 Check out Off-Road.com's articles on exhausting the 2.5 and 2.5 performance. I have included the links below... http://www.off-road.com/jeep/cherokee/2001/03_mar/flowmaster/flowmaster.html http://www.off-road.com/jeep/cherokee/xjtech/engine/4cyl_perf.html[addsig]

1062651 I made my own intake for my 4.0HO (1995). What I basically did: 1. I bought a KandN Airfilter code is E1796... Its a big one. 2. I bought 2 billet fuel filters with the see through glass. The KandN fit right over the stock intake hose. I removed the airbox and put the KandN over the...

1062652 I like the regular fan. Electric fans seem to be an option. Right now I am running hood scoops. Thank god for those... I don't know how hot it would be without them.[addsig]