Search results

I hadn't realized that Superior made a 33 spline axle shaft+ARB kit. Well I've been trying to compare Superior and Moser, and what I've found is on this website: http://www.funtigo.com/virginia4x4?g=967307&cr=1&rfm=y So it looks like 4340 through hardened steel is better than induction hardened...

I didn't realize at first that you were using trailer fenders! That seems like a really good idea. I like how the fenders will stick out farther to eliminate a need for fender flares.

I wouldn't worry about running an AX-15 behind a stroker. From what I've heard, it usually holds up fine. It's really just an issue of how hard you 'wheel the Jeep, and I just figured I would play it safe as I will be running 35's and hitting the gas alot. I wouldn't go with anything weaker than...

I'm looking into getting some mosers for my Jeep, and noticed that Moser will make me 35 spline axle shafts for my rear dana 44 and ARB makes 35 spline carriers. However, I've heard a few draw backs about this, and have no idea if they are true at all. First I heard that 33 or 35 spline shafts...

The stroker will definately be a torque monster. I'm building my stroker for the low end torque, emissions, and to keep it Jeep. A stroker will rip apart alot of factory trannies, but not all of them. The weakest manual I've heard of people using is the AX15. I'm going with an NV3550, since I...

I have to agree. I'm building a stroked 4.0L right now, and it's turning into a money pit. Mainly it's just becoming expensive because I'm doing everything "right" and not taking any short cuts. Not that the stroker is a bad motor, only dollar for dollar you get more out of a V8. Some states...

Punctilious Stalwart, Bertha, Helga, Cereo, Olga, Jethro, etc. Maybe Lance?

Looks good as long as you don't mind doing away with the fender flares. When I cut mine I left a little bit more side to keep the fender flares. Also, if you have access to a welder, you might want to consider running steel tube along the outer edges for strength and a clean look.

It sounds like PRP's are what people are raving about. Which model do you think is best? The Competition High Back looks nice, but I'm wondering how hard it would be to get in and out of due to the 10" sides. http://www.prpseats.com/suspension-seats.html

The Jeep will be my daily driver, so the trashing of it will be kept to a minimum. As for price, I'm hoping not to spend an arm and a leg after how much arb's and mosers are setting me back, but I'll pay what is necessary to get some decent seats. Those Corbeau Forza seats look pretty nice; I'll...

If you ever want to lift it, then I would say do the lift and tires at the same time. If you don't plan on lifting it though, then definately some decent mud tires would be first up in order of mods. Oh, and bobbing the front bumper on TJ's does look pretty sweet, if you're going for an...

I'm finally considering buying new seats for my CJ7, seeing as the original ones are torn up pretty bad. Since I have 5 point harnesses ready to go in the Jeep, and my stock seats let me slide around way too much offroad, I'm thinking of getting a pair of racing seats for the front. Any...

I found an AGR Super Box 2 for sale, but it is for a Wrangler. Would it be possible to use it on a CJ? I think I read somewhere that the steering shaft will need to be replaced with a Wrangler one, but I'm not sure.

I'm looking to replace my Xplod deck with something with better base, maybe Pioneer or Alpine. The thing is though, I need one with an aux in port so I can hook my ipod up to it. Anyone know what decks have aux in?

About a month ago I coated my engine block (dipped, vatted, bored, decked, cam bearings press in) in WD-40 to prevent it from rusting as I knew I would not be able to work on it for a while. Now I'm wondering if the corrosive properties of the WD-40 would have damaged the cam bearings (which...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=8012299907&sspagename=STRK%3AMEWA%3AIT What do you think? The plate is .25" thick steel and the tube is .095"

Santa Barbara California, San Diego California.

Good place for Bosch relays? I have two fuse blocks from the postal Jeeps

RE: 1999 Sahara Soft top windows WANTED With 9" of lift and 38" tires, you need the axles to be as wide as they come

There's no sticker under the hood?