Search results

1050493 does a carberated 4.3 even make much more hp than the four. Likely it has more torque but without the efi you run into lack of fuel during steep inclines. A great add on for the four cylinder would be an inertia ring. It add lots of low end power, lose a little on the top, but...

1050629 --about the inertia ring-- Go to www.jeepshots.com. This guy installed one on his 97 tj 4cyl. At the time he ran dana 44's front and rear, 4.56's with an ax-5, np231, and 36" tsl sx's. He was able to chirp them in second gear and claim no usable horsepower was lost. At lower...

1050803 Go dana 44 rear. Your gearing options for that axel go to a lot steeper ratio. like 5.89's if you want a mega-crawler. The 44 in the cherokee most likely has a 3.07 ratio with 30 spline shafts.[addsig]

1050805 since my jeep is a diamler-chrysler model, i can take the obvious and say mercedes without being a traitor[addsig]

1050806 unless you changed it you t-case should be a dana 300. The rattling could be a syncro going bad in the transmission.[addsig]

1050809 rubbing the fenders is the best way to show off your suspension for everyone to see and wonder, whats he runnin?[addsig]

1050810 hes right on except for one thing. Its $69.[addsig]

1051146 email me for pic[addsig]

1051148 Ive decided to through in the stock clutch, slave, pressure plate, and all the rest of the parts. Everything was in perfect working condition when pulled[addsig]

1051150 With a 2" spacer lift 32's fit good. The rubbing is minimal, just during full flex, in fact my buddies has never rubbed. 3 1/2 backspacing will be plenty. If you want 33's im selling a skyjacker kit, with springs and flex heim-joint short arms. Its in the for sale section, or...

1052110 ARB's are nice. The drawbacks are strength and engagement lines. Ive sent back the spools i bought for my new axels and have decided to use a detroit in the rear and an OX up front. Lockers are fine for the street. ARB's are great you will have no problems on the street. In fact...

1052112 Ive got the 1inch body lift on my tj too. Itll look fine after a couple weeks. Spend the money on the one inch motor mount lift. It make a BIG different in driveline angles. As far as the color gap goes above the frame in the rear, under the plastic fender poser thing, paint...

1052114 Procrap suspensions are just that. Nothing they have put out yet is worth taking over other companies products. If your looking for just to replace yours and lift, get the rubicon express springs. These are jeep people that build daily driver off road rigs. Their suspension...

1052116 Mopar doesnt sell any performance parts on its concepts. such as nitrous, cams, not for sure on the performance modules. Clifford performance has all the best parts for mods on straight 6's.[addsig]

1052117 The straight is a great out of the box motor, put its not the best at producing mind boggling horsepower. On Dan McKeag's 2000 tj (Viper TJ builder) before he did the 4.7L V8 swap, he had a supercharged and stroked six. It produced like 360 hp's, not too shabby, but I bet with...

1052118 If your wondering, my tj stock ran the quarter in 16.88 @ 72mph. Last year with 35's and 4.56's it was 16.96 @ 70mph. My friends buzz-bomb eclipse tubro ran it stock over 17. With all the retard mods its a 16.6 and it probably couldnt get a 200 on a 20 degree ramp.[addsig]

1052119 Im selling my stock axels if you interested. Dana 44 rear and Dana 30 front. The dana 44 has 4.56's and a Detroit locker, while the dana 30 has 4.56's and a trutrac locker. All the brakets have been reinforced. If your interested you can email me At AFholmz@aol.com or call me...

1052120 His jeep has been found, its in another post.[addsig]

1052121 About 18-19 highway. Id say a lot less in the city. 13 maybe.[addsig]

1052122 In the north, full doors and hard tops are almost a necessity for this winter. Plus ive got a soft top for most the year and the doors come off easy. They've been showing off the DAKAR wrangler for years. They wont come out with it, unfortunately they will release the willy's 2...