Search results

1059118 Yup. The warranty that should be on your jeep is you fixing it. I love working on my jeep. Nothing is better than getting away and turning a few wrenches. Any jeep that is a real jeep is going to break.[addsig]

1059125 Did you have the shackles made? I havent seen shackles at that length. Like Bounty said... If they are 2" long shackles then you will only really get 1" lift. This is because they are only at one end of the spring. Good point on the shock though. Go cheap not if you are planning on more...

1059132 I give you props for messing with the clutch. I have a 91 which also have the internal slave and it needed a new clutch, flywheel, master and slave. I didnt even mess with it. I usually always work on everything on my rigs or I give it a try. Not the clutch though. I had the "Clutch...

1059145 I have actually seen them a lot cheaper than that... When I was looking into doing it I as seeing prices around 300.00 It might be different for the TJ's though. I will do some checking around for ya![addsig]

1059189 I have heard good things about the MT/R's. My girlfriends dad runs them in a 35" on his 2000 F350 and he loves them. He went from a Swamper SSR and he said it was a great upgrade in ride quality... Here is what JP Magazine March 2003 said about the two in their comparison... GOODYEAR...

1059200 I would like to give you an answer but I cant exactly. All I can tell you is that its a jeep. When you hit stuff you hear it. :-) :-) :-) [addsig]

1059204 I love the stuff. My frame, wheel wells, bumpers, sidesteps, and my Floor! I love it. You can scratch it, and it just rinses off. I deffinetly recomend it... I bought the Dupicolor truck bed liner in a can and did everything. My floor was done already when I bought the rig.[addsig]

1059205 Hey bud, I heard about the also. They sound tight. I havent done much looking into them, but I still have my doubts about them. I dont know how you could see through them still after the gear oil is in there for a little and maybe gets a little dark. Let me know if you find anything...

1059207 At the inside of each door, there are pins. These pins are what trigger your interior lights when they are open. I had a problem similar to yours. My wires seem to be rusted and coming loose on the backs of the pins. Check that...[addsig]

1059212 Hey, I do still have the wheels and tires. E-mail me... OneBigYJ@yahoo.com[addsig]

1059220 If your leaf springs have a negative arch to them they are probably going dead :-P [addsig]

1059242 Yes. Its a common thing people see when lifting! Or lowering :lol: Im sure you put a drop pitman arm on... Anyways, now your draglink is at an angle. This means everything works a little different. I have about a 1/4 turn before anything starts working on mine also... Its something...

1059243 It was around 48 this last week and I have had the top off the whole time. And did I forget to mention that it was raining so hard on the freeway my wipers were on full blast. When I got home I just pulled my drain plug! :-P P.S. I had the Bikini top on!!![addsig]

1059244 How much does all that run Snitty?[addsig]

1059245 The fan that BigTlilODD mentioned is something you should think about! I have actually had a small fire start from an amp being in too small of an area mounted to the carpet. Just doesnt let it breath enough. It also runs you amp harder and you dont get as much power... (Did a LOT of...

1059246 Hey Snitty! Have you checked into the prices on them at all? How much do they run? Who sells them?[addsig]

1059285 I have the 4.0L 6CYL[addsig]

1059286 Yup... Get in there and play with the adjustments. Loosen the hinges and lift up on the door. When you have it in the right spot righten everything down. Sort of a shoot hit and miss way of fixing it, but after a couple trys you should get it to work.[addsig]

1059288 Make sure you get someone to help you. Have them pump them a few times and hold them to the floor while you tighten the bleeder. Worked great for me when I put new calipers, pads, and roders on my 91. There is also a little tool you can buy so you can bleed them yourself. It has a...

1059289 Yank that wire off the back of your pressure pins on both sides. [addsig]