Search results

1062526 If its a fuel problem you can do a pressure test on the fuel rail to see if its the pump. With a combination pressure testure you can do a capicity test to check the flow. The pressure tester is a good thing to have and can be picked up at your local parts store. Mine was $40.[addsig]

1062533 Before spending the money trying checking the CPS with a volt ohm meter. I forget what the values are but they are in the shop manual. Also try unplugging the conector a few times and try starting your jeep. 99% of the time the CPS fails at the connector and can be a pain to...

1069087 After a quick phone call I got everything straightened out. Bent upper mounts. I had to pry it out to make it fit. :-) [addsig]

1048720 Hello, This is my situation.... My '88 cherokee died in my driveway. It ran perfect before with no signs of failure. I tracked the problem down to the CPS sensor and replaced it. That allowed me to start the engine, and after 10 minutes of idling it dies. This did not happen before. In...

1068951 I just recently purchased a pair of teraflex adjustable upper control arms and found out that they will not fit into the frame mount. The old bushing on the stock arm is 2" and the tera bushing is 2 and a 1/8". My mount on the subframe seems to be straight. Has anybody run into this...