Search results

1048779 Humble Texas, Its north of Houston Texas about 11 miles. We wheel on the San Jac river at Hwy 242. Unless water gets too high.[addsig]

1048862 The diagram is perfect except it does not show the fitting on the carburetor. Ill re look I may be missing it. I did see the one going to the distributor.[addsig]

1054279 I took the trac bars off and their not on now. How could they cause the steering wheel to wobble while im driving.[addsig]

1054303 Ok ill get the dropped pitman arm and see how that works out. Tug for your answer i did not buy anything yet but 3 new u-bolts and the new spring perches. I fabbed my own trans case lowering bracket and just re bent my brake lines and re-screwed them to the frame. The driveshafts even...

1054343 A trailer place called trailer wheel and frame.[addsig]

1054411 JEEPSTER go SOA I just did mine this weekend and it only cost me for the spring perches and the tubing for the trans lowering brackets. Im fabricating lower shock mounts so I will still use the regular shocks. I took my brake lines loose and rebent them so their fine. My front shaft is...

1054415 The ones I used were only 1 3/4 in wide they work just fine. The driverside i think it is has to use a narrow one cause of the differential.[addsig]

1054550 So far so good. Going to make shock brackets this weekend and get them on.[addsig]

1055213 I just did mine last weekend and I did it all by myself. Its easy if your bolts arent rusted, mine were all easy to come off. The hardest thing for me was busting out all the old spring bushings to get the new ones in. I should have pics up by tomorrow of my bumpers and the SOA lift...

1055304 Thats exctially what ive got is axel wap. Its that my rear pinion is not right i got it too straight with the rearend. Ill fix it this week. A few pics are up at photos.yahoo.com/baddjeep2002[addsig]

1055334 Ok the rest are there now.[addsig]

1055336 The burnt orange one has 42s it can be found on a buddies site www.bmtoffroad.com[addsig]

1055379 Jeepin your right I dont know what happened, I could have swore i had it set right when I welded it but what the hell its a Jeep thing. Ill just redo it no problem. Snitty I did not spend but 57.00 for the pitman arm and about 40.00 on the rest of the stuff to lift it. So go get the...

1055380 Yes joopin my dad and i fabbed those brackets just so i didnot have to buy longer shocks. And yes bigger tires are on the agenda. SOON[addsig]

1055381 Tug i havent got to really drive it hard yet till I get the rearend redone then I will let you know how it handles.[addsig]

1055587 hi-c I actually am going to lower the trans case another 1/4 of an inch. Snitty I hear what ur saying but when you get ready if you need any help let me know.[addsig]

1055932 Ok I went all the way to a 4 degree shim and it made a very small amount of difference. I cut the spring perches off and will weld new ones on today. [addsig]

1056004 The vibe is so little that my wife could not notice it. The way I knew a very little was there is cause I know what im feelin for. But for the most part its pretty good now. My friend says I need to lengthen my rear shaft but the yoke that sticks in my trans case is 3 3/8 in overall and...

1056252 I dont want to have to go SYE if I dont have too, I put the Chevrolet leafs in the rear today and will do front tomorrow. They helped the rear out alot. Now I can add custom springs to my signature lol. :roll: [addsig]

1056529 Yes I have the same seats look at my pics at http://photos.yahoo.com/baddjeep2002 and you will see them. I am 6-2 myself and they were taller than the stock ones but I have just gotten used to them[addsig]