Search results

  1. C

    Zipperssssssssss

    I broke the zipper on my Bestop Sunrider soft top. The driver's side window zipper, the half that's attached to the top is ripped. I emailed Bestop to try and get one from them. They said contact my local dealer and they can order me one. Tried three Bestop dealers in my area and all told me...
  2. C

    YJ Seat Belts??

    The exact same thing happened to mine and I did the exact same thing you did by swapping belts. Got mine fromt the shop I gave you a link to. The guy there says it's a very common problem in older YJ's.
  3. C

    YJ Seat Belts??

    Ok. Here's their address. You can search around their site for the belts but if you don't see them on there, try contacting them. They have tonnes of used jeep parts in their store...... http://www.gemini-sales.com/
  4. C

    YJ Seat Belts??

    I can check around when I get my stuff out of storage. Won't be for a few months but if you still need one in a few months let me know, you can have it. I will also be going to a local shop that sells nothing but jeep parts. I'm sure they have some. How much are you willing to pay if they have...
  5. C

    I demand that you let me break the law!!

    We have the same problem here in Vancouver but not really with mexicans. More with east indians and chinese (not trying to be predjudice). We get boat loads of chinese immigrants off the container ships and the east indians are bringing over their family for indefinate vacations. Most of the...
  6. C

    Okay, go ahead and let me have it...

    My buddy got a VW Golf TDI to save on the fuel cost he's paying to drive his Dodge Ram to and from work. He says that he's saving so much money in fuel that the car is paying for itself and now he has two vehicles. He's taken the "daily driver" insurance off his truck and has pleasure use only...
  7. C

    Hippo Liner

    Hippo is a knock off of Rhino liner. I've seen both and couldn't tell the difference.
  8. C

    Anyway to get better braking?

    I'm not assuming the brakes are properly adjusted just because the rear axle was rebuilt. I had the brakes all checked and adjusted a few weeks ago. The braking problem isn't that severe. It still stops with no problems, just not nearly as good as when it had stock size tires on it. I don't...
  9. C

    SYE or T-case drop?

    If you have the money and are going to need one eventually then I say go for the sye. You'll also need a cv driveshaft. Otherwise you can make spacers and drop tc for free if you can do it yourself.
  10. C

    Anyway to get better braking?

    It's a 93 YJ on 33" tires. Brakes are completley stock (except the pads) and all in good shape. Recently had the front rotors machined and the pads are good. The rear brakes have also been adjusted. Just spent almost $2000 (Canadian) having the rear axle completely rebuilt with chromoly...
  11. C

    Anyway to get better braking?

    Hey. My brakes suck. I've heard from someone that 95 YJ's have a better master cylinder for the brakes which will improve braking. Any truth to this? Any other ways of improving braking? Another suggestion was converting to an ABS system but I think that's just one more thing to break when I get...
  12. C

    How to remove TJ fender flares...

    I wouldn't waste your money on replacing flares just because of the color fading. There's ways of restoring the color. Not sure if the heat gun method will work on TJ flares but someone else here will be able to answer that one. I used a very mild cut wax/scratch remover on mine to remove the...
  13. C

    Stanley Cup!

    Well since my team is out (Vancouver) I'm gonna have to go for Calgary since I have a lot of friends from there. Still can't believe we didn't even make it into the playoffs. We definately had the team to go all the way but they played like crap.
  14. C

    Need part for Bestop Sunrider.

    Hey. If anyone has an old Bestop Sunrider for a YJ, I'm looking for the metal pieces that go in the upper corners of the windshield frame. They are the pieces that the frame for the top clip into. I have two sets of them but both are in storage and unaccessable for the next few months. If you...
  15. C

    Rooster's Inaugural Run

    Nice work. I hope to one day have a rig like that...won't be for a long time though.
  16. C

    Wheel Choice- Aluminum vs. Steel

    I have a set of black steel wheels for my snow tires and aluminum ones for my regular tires. There's not much of a weight difference at all between the two. The aluminum wheels are a lot thicker than the steel ones. If you're gonna be off roading it a lot and abusing it, then I'd go steel. At...
  17. C

    I hate vandals!

    If that cap doesn't fit, I know of a place out here that deals strictly in jeeps. They have all kinds of parts old and new. I'm sure they could help you out. They have a website I can try to find the address for if you need it. You'll have to pay to ship it from Canada but how expensive can a...
  18. C

    Pictures of my modified Rubicon

    What's with the sherrif's car parked behind you? Get nailed for something?
  19. C

    Clutch Again?

    You might have got mud into the clutch and when disenguaging/enguaging you might have glazed it. Machining it might help.
  20. C

    Vibe problems.

    Don't think it's motor mounts because I'd probably notice it also at slower speeds under a high rpm and hard acceleration. It only vibrates when in gear under acceleration at high speeds. It vibrated the exact same way before the u-joints were replaced last week so I'm sure the driveshaft went...
Back
Top