Search results

Hi long time no see! My 2000 xj blower won't blow. Resistor is new. Blower is new. Switch panel tested with dvm and IMO isn't the issue. When doing 80 mph, the heat blows hot through the vents or floor, OR if I switch the center vacuum dial to AC it blows cold, but only if I'm going fast...

Hi there! Been a while, sold my jeeps while back but now I'm considering another. Randomly found a 76 cj7 recently and the price is awesome assuming the seller is truthful. Says it will need full brakes, like everything but the pedal. Haven't physically seen it, only in pictures but I hope to...

Almost done with this jeep. I learned recently I need to replace the rear cross member and C-channel thanks tto rust. Basically the body is unable to attach to the frame at the 2 rear mounts. So when driving it is loose and noisy. I bought a few 36" pieces of C- channel to replace the body...

Hi. Still rebuilding my 78 cj7, and am looking to replace the bench seat for some buckets up front. I'm wondering what ....known makes and models... of cars or trucks have good fitting front seats to pull from a junkyard or buy on craigslist. Any advice would be great! Thank you.

Hi there. I'm rebuilding the heads for my 304 and I want a better flowing intake for when I put it back together. Ideally I'd like an aftermarket edlebrock but honestly just want a better flowing intake. Thanks, Ryan

I've hinted before how I wish I had a SBC 350 in my cj instead of the AMC 304. Cheaper power, abundant parts locally, and a ton of aftermarket support, plus I know it better. Anyway. The other day I was attempting to fix a exhaust manifold (header) leak that was driving me insane. After removing...

Hello Today I removed a leaky header to replace the gasket and seal it up w hi temp rtv to find a nasty little surprise. The fastener closest the firewall is broken off in the head and virtually unremovable unless i pull the head to get more room to ez out it out. Sure I can put it back...

So I've finally been able to drive this thing. The steering is much better than it was when I bought it, I've replaced the steering shaft with one with u joints top and bottom, replaced all the steering box mount bolts with new grade 8s, the front shackles and bushings are OEM replacements...

...and I scratched it trying to get it in there, oh yea and its still attached to the top, nice and tight with blue threadlock. SON OF A B!+$#!! How mad am i right now. Worst is that I ordered it from quadratec, so if I decide to return it and they decide to take it I'm another week out. Had...

This cj I bought has a beach seat which at first I liked but its kinda slippery, especially on turns and since I don't use doors I'd like to have my bum firmly in a seat as I make a hard right skipping through a yellow light and not be hanging on by a seatbelt and a steering wheel. I'm just...

My steering is terrible and just plain unsafe. While taking the box out the other day I realized why. The shaft (sector shaft?) attached to the pitman wobbles, the coupler at the box is shot. The upper joint that meets the column under the master cylinder gives the wheel 10 degrees of play...

so I ended up buying the 78 cj7 I was asking questions about weeks back. Been doing a lot of fixing since then. Still not registered yet since I still have work to do on it so I feel confident it won't leave me stranded. Anyway.. it has a 304 and the valve seals are leaking, some point I'll...

I need an electric fuel pump for a 304 2bbl w headers and open exhaust. The one on there is shot I believe as it pumps nothing but makes noise like a fish tank pump. Basically just the gph needs for the motor and I'll get the rest. I may go big and stick a psi regulator in line so I can adjust...

Hey there! Been 7 years since I sold my yj, and Im in a position to buy another jeep as soon as I unload the car thats gonna pay for it lol. I found a neglected, yet decent 78 cj7 with a 304 nearby here in st pete, fl. Went to look at it this morning and aside from the guy not having the...

Hi. Haven't logged in in several years since I sold my frankenYJ. I have the itch again, that jeep was my favorite vehicle is ever. Since then I've had many unique cars but none give the satisfaction of a jeep cj or yj. I'll be selling a car in a month or so and replacing it with another jeep...

im looking for a good tech site. No offense - I used to be able to get great tech answers, and read very interesting and educational posts. but the river seems to be running dry. Dont get me wrong.... I enjoy hepling out those that ask questions appropriate to to the CJ YJ TJ tech forum, but...

- YORK 210 Compressors for OBA - $75 - Taurus 2 spd Electric fans (up to 4000 CFM) - $45 <KIT> ($80 w/thermostat and harness for using as automatic fan) - TBI set ups for Carb'd Jeep 258's - just like Howell TBI, but half the price and they are programmable with a laptop -_email for...

Anyone added aftermarket EFI to their carbed 258? NOT Howell, NOT MOPAR, Not WEBER... But Im thinking Megasquirt. The DIY EFI. Let me know, Im thinking of putting the DIY EFI puzzle together this summer along with a 4.0 head conversion. Any one done the megasquirt route? Cheapest route Ive...

Hey all, havent visited much, been working, and well dont own a computer anymore... anyway, i spent half the day at a boneyard today, just looking, (hiding stuff i will pick up next time LOL) No dough today or tools... So I learned I can get a 4.0 head for $100 including intake & throttle...

Hey all, havent posted in a while, working 60 hr weeks... Gonna need a transmission here pretty soon. My 1987 BA10 with over 200K is getting harder and harder to shift. Im afraid to go wheeling anymore... The last thing I need is to be stuck 10 miles in the snow covered woods without...