Search results

If it is a piston slapping what is there to do to fix it? Beside replacing the motor.

what is the chance of a slaping piston?

How would you know if the crank is scared? .... I took the oil pan off today and one at a time i took the rod bearings out and check them out they look fine i assume i mean there wasnt any chips missing or any damge done. After putting them back together. I started on the main bearings and they...

OK, This is whats happing as of now i still have a tickin nosie under the value cover plus now the I'm hearing knocking sound. Buddy of mind told me crankshaft bearings are out. Does any one know how to replace these or around how much it cost to do so?

I took off the value head cover and clean the rockers as well as the rods, when I started her up she would only shoot oil through some of the rods and not others. What ya think

ok i replaced the sending unit. And Now the oil pressure jumps from 0 to 20 when i give it alittle gas but at idle, it returns to zero. So i took the value cover off. Then started the engine, all rockers where moving but some would shoot oil and others wouldn`t. i`m not sure what to do now.

Ok i replaced the old oil pump, oil filter, and the oil. I also took the oil pan off and clean all the internal parts and the rockers as well as the pins. after putting everything together, it cranks easily (just like new). but still no oil pressure. You can hear ticking but not really any...

I'm looking into buying a 97 jeep wrangler TJ (6 cycle) has 97k and was run into a mud hole bigger then the jeep. mud got in the oil and the entire engine was coverd in mud but i dont think any went into the air intake. The coolant was good. the oil was drained and fresh put back in. It cranks...