Search results

  1. madecant

    shifting problem

    I tried Redline before i rebuilt it to see if it would help. you are correct it is pricey the other problem is i had to drive 150 miles to get it at summit racing because no one has it in my area.
  2. madecant

    shifting problem

    Update to my shifting problem, I drove the jeep over to my friend’shouse who lives about 30 miles from me and when I got 5 miles from him the jeepstarted shifting from 1st to 2nd and it worked fine the whole day so I decidednot to pull it, put this morning when i went to the store in it, it had...
  3. madecant

    shifting problem

    i havent got it figured out yet, I was going to pull it back out this weekend and look back inside the trans, but didnt get around to it. I did replace the clutch master/slave cyl. helped a little but not much. it is a AX 5 trans and it had all the synros, bearings and seals along with a couple...
  4. madecant

    shifting problem

    I rebuilt my transmission because when I bought the jeep itwas grinding when shifting into 2nd and when downshifting in allgears. I found my shift dogs for 1st and 2nd lying in tobottom of the case and synco were shot. Now that I have it back together andinstalled my problem is when I’m at idle...
  5. madecant

    Help figuring out lift

    Ok one more thing? I looked at rough country shocks on there website, the same that is on it now and they say the shock is good for a 2-4 in lift. so i should be good, The bushings on mine are shot and i have a really rough ride. ( i mean when it hits after going over a bump it hits solid)...
  6. madecant

    Help figuring out lift

    oK, I did the measuring andi have 9 1/2 inches from the pumpkin to the ground and 22 inches from the rocker to the ground. so does that mean i have a 3 1/2 inch lift? do i have to take the tires in consideration? i also measured the spacing from the top of the tire to the bottom of the wheel...
  7. madecant

    Help figuring out lift

    I have a 94 Yj that isin desperate need of shocks. besides the bushings being gone when i go over aspeed bump i get whip lash from how hard it hits. the problem is i don’t knowit has a suspension lift or not. it did have a 3 inch body lift when i firstgot it but i removed it. i have 31X10 tires...
  8. madecant

    Removing a body lift

    I bought a 94 yj for my 16yr old and it has a 3" body lift with 31 X10.5 tires. I would like to lower it untill he gets a little older, both for safety and insurance reasons. how low to factory can i go without changing tire size? Thanks
  9. madecant

    downshift grinding

    I just bought my first jeep a 94 yj and whenever i try to downshift from 5 to 4 and so on it grinds, i almost have to be at a complete stop to downshift. and it will grind a little when just shifting up. I replaced the clutch, pressureplate, trow-out and pilot bearing and i also bleed the...
Back
Top