Search results

  1. P

    free to a good home

    RE: Re: RE: Starter problems, I think. . . Ive got a pair of inner door panels for a 93 yj that I'd like to give to a person and not the trash can. These panels were painted black and kept peeling so I replaced them with a new pair. With a lil elbow grease and some dye/paint they should be...
  2. P

    front brake calipers question

    RE: Do YJ half doors have locks? A cohort at work has a 91 yj with 33" tires and wants to know which would be a better caliper... phenolic vs metal piston. Any comments please. Frank
  3. P

    can any body men out there lend some advice?

    I got a new tailgate, windshield frame and necessary gaskets/moldings for my gals 93 yj. She would like to have the new parts installed asap but we are not planning on painting the jeep until this spring or summer. Will the protective coating/paint hold up or should we get these two pieces...
  4. P

    how do I get rid of springwrap

    I put a Rough Country 3" lift on my gals 93 YJ 5 speed 4.0 last year and I am starting to get some terrible spring wrap. At first I thought it may of been the U-joints so I replaced and greased them up to no avail. Seems every time I try to duplicate the noise with someone with me it wount do...
  5. P

    seems I only post when I need help or advice however

    How about them Steelers! I've been waiting for one for the thumb since 81. Not to rub the NE member base the wrong way I hope this year might be the year. I've lived in two foreign countries and numerous states but no matter wher you go in life you have to remember where you came from. I am a...
  6. P

    Just wanted to say thanks

    It's a Jeep thing... well, I guess you understand Seems my gals 93 YJ does have the AX-15 and not the Peugot transmission as you all told me. About 1 1/2 years ago we had the trans rebuilt and the mechanic told us it was a Peugot transmission. Using the boards wisdom and Inspector-Gadgets link...
  7. P

    can anyone help a fellow jeeper out???

    TJ speaker wiring Had to have my gals 93 YJ towed home this weekend, I think it has a bad slave cylinder (see previous post). The jeep has the dreaded Pugeot trans, I know the ax15 should be with this year but my gal fried the engine a few years ago and had it replaced. I think the mechanic...
  8. P

    hydraulics anyone?

    Had to have my gals 93 yj towed home this afternoon, Its a 4.0L manual trans. The clutch is stiff and there is fluid in the master cylinder, but after the engine starts the clutch goes limp and engages a lil bit just above the floor board. Is there any vaccum lines associated in the design or...
  9. P

    93 YJ rear leaf spring compatability

    Can anyone answer or tell me where to find the answer to the following question? Are 93 YJ rear leaf springs compatable-fit onto a 96 Cherokee rear axle setup? THanks, Frank
  10. P

    brand new soft top

    My friend asked me if I knew anyone that might be interested in a soft top so I'll just pass the info on to all of you. Brand new (still in box with mounting hardware) Supertop #5609-37, spiced denim soft top for 1997 and up. He said it retails for $700 and will let it go for $450 OBO, He will...
  11. P

    curious about a parts function

    On my gals 93yj 4.0 5 speed there are two transmission mounts, one is approx 4 inches by 8 inches rubber block with two studs that go thru the skid plate and assembled with two nuts. The other (also goes thru the skid plate) mount in question is a stud threaded on both ends with a shoulder...
  12. P

    HELP!!!93 YJ would not go into gear

    Decided to go away from the office for lunch today and jumped into the jeep and fired her up. When I tried to shift into first gear it wouldn't go into gear, 2nd, 3rd, 4th or 5th wouldn't work either. I tried to get it to go into reverse and just got a bunch of grinding. After shutting down the...
  13. P

    Got my bucking problem squared away

    Jeep buying questions need answers asap Dropped the gas tank yesterday and noticed the vent lines for the roll over check valves were not attached to anything. Got some gas line hose from Napa and proceeded to hook the T fitting between the two vent roll over valves to the engine vent hose and...
  14. P

    93 Yj fuel pump replacement

    Took my gals 93 YJ to the stealership this morning and was told my jerking and bucking problem was fuel supply related and not electrical as I presumed. They charged $70 for this diagnosis and claimed perhaps it was a bad fuel pump. They want 3 Hours labor ($210) to drop the gas tank and...
  15. P

    hold the presses, this rodeo is not over yet!

    Replaced the coil Sunday and all seemed to be back to normal with my gal's 93 YJ. I stopped at the store on the way home after work yesterday and that is when the problem started again. The Jeep will buck, sputter and cough when started after the engine has reached normal operating tempature. I...
  16. P

    thanks snitty and numbrsevn

    Airbag sensors Ya guys were right, Replaced the coil and is well again with my gals baby. Not ony did the bucking problem go away the engine is now starting alot quciker. Thanks again guys for your input. Frank
  17. P

    engine identification numbers

    Using the the Haynes manual I've located the engine number on my gal 93YJ which is 4M x 27. Where or who can I call to see when this engines year of manufacture was? The engine was relaced a few years ago and I believe it was replaced with a older year bcause it has the dreaded Peugeot...
  18. P

    93 YJ bucking problem

    My gals 93 YJ runs like a top when cold and first started. It will run great for hours until I shut it off and try to restart it. Some times (not all of the time) we are experiencing a bucking/jerking worse than a cowboy riding a mad bull, It almost feels like the thing jumps time. Its a 4.0...
  19. P

    red line mt-90 or mtl question

    Can I use the red line products with the peugeot transmission? If so should I use the mtl or mt-90. Thanks in advance ,Frank
  20. P

    it runs, no drips and one error

    Put my wrenching hat on this weekend and installed a clutch m/c on my gals 93 yj. Removing and installing the roll pin was the hardest part and all went without a problem until the bleeding operation. I turned the 7/16" flared fitting nut in lieu of the 1/4" milled nut on the bleeder fitting...
Back
Top