Search results

  1. DSCF0001

    DSCF0001

  2. jeep

    jeep

  3. joey_and_jeep

    joey_and_jeep

  4. remember5

    remember5

  5. R

    Ignition problem... any help with some codes?

    1062321 My Haynes manual says: Beofre checking the crankshaft position sensor, check the voltage supply and ground circuits from the PCM. On all except 4.7L V8 models, follow the wiring harness up from the crankshaft position sensor to locate the narness connector. Disconnect the connector...
  6. R

    no passing gear

    1062449 If the '99 has the 45RFE transmission, its all electronic, which means there is a Transmission Control Module probably mounted on the inner fender by the firewall. I'm thinking that you may have blown a fuse by pulling it out with the key on. Recheck all the fuses first. The manual...
  7. R

    Annoying Noise when Key is in ignition

    1062498 Make your wife stand outside until you get it started, then let her get in.[addsig]
  8. R

    Annoying Noise when Key is in ignition

    1062499 Sorry, I was being funny. My ZJ manual says the buzzer is in the glove compartment relay box. I would get under there and put the key in, and touch the buzzers ( shows to be rectangular and about the size of a garage door opener ). Until you feel the vibration. It won't hurt to...
  9. R

    Home made intake!

    1062501 I took the hose from a shop vac and used duct tape to hook it into the air box tubing, then ran it back around and into the firewall by the passenger side. Then up and over the passenger seat into the back cargo area. I got a power inverter and hooked that up so I could plug in the...
  10. R

    Electric Door Locks

    1063028 Are you talking about power door locks, or are you talking about keyless entry?[addsig]
  11. R

    Oh those headlights...

    1064240 On that topic, somewhere there was a post for "european" light assemblies for the zj. Did anyone do that conversion, and are there pics? [addsig]
  12. R

    Grand Cherokee Brakes

    1064241 Also remember that some vehicles come with semi metallic brake pads which actually have pieces of metal in the composite that can make a "grinding". The harshness of the sound varies from vehicle to vehicle. So, if you have been to the dealer, and you have pulled the wheels off and...
  13. R

    Need 4.0L compression standards for comp. test. Please help!

    1059180 You may also borrow a compression guage from a friend to be sure yours is reading correctly. [addsig]
  14. R

    Steering is sloppy!

    1059513 I'm not sure about the xj, but I just cured the exact same symptoms in my Jaguar by replacing the steering rack bushings with urethane. You need to get under the front end and let someone turn the steering back and forth so you can watch it move. You'll see where the slop is. Now...
  15. R

    Changing out my rotors...

    1059742 You may have to bite the bullet and get the factory rotors. I think you can buy MOPAR parts online which might save a few bucks. Do a search for 2001 Jeep brake rotors and see what comes up. Why are there no Wal Marts in Iraq? Because there are already hundreds of...
  16. R

    Need sum advice for new jeep

    1065968 While we're on the subject, I'll throw in that I'm in Chattanooga Tennessee. Go Vols, Titans, and Jack Daniels.[addsig]
  17. R

    Anyone have a owners manual they wanna part with?

    1067711 Lets get this straight. An owners manual is what comes in the glove compartment and tells you how to use the radio, wipers, etc. A shop manual tells you how to fix the radio, wipers, etc. Haynes, chiltons, etc are shop manuals. For an owners manual you can put in the glove...
  18. R

    motor swap

    1067713 The 4 is a better engine in my opinion, but not much power. I agree the V6 blows. The gearing for the 4 would be better than the 6, maybe 4:11's. That would be the way to go, and find an inline 6. There is a great article about buying cherokees in JP magazine, probably 2 or 3 months...
  19. R

    90 cherokee overheats

    1064339 Since it only gets hot when you are idling, your issue almost has to be fan related. When the work was done in August, was the fan shroud put back on? If there is an electric fan, is it working? If its a serpentine belt, is it run correctly? Does the jeep overheat if you don't have...
  20. R

    Transmision help - engine codes - shifts wrong

    1064464 I would check the connections between the transmission and the TCM which is located under the dash on the drivers side on the inner fender panel. Maybe find a unit with the same transmission and swap the TCM out and see if that makes a difference.[addsig]
Back
Top