Search results

1056446 I can move the stick into 4 HI or 4 L, but it remains in 2 wheel, meaning the front wheels are not spinning under load, no power to front wheels. So, I can still drive and there appears to be nothing wrong with teh jeep, it is just not recognizing that I have shifted the stick into 4...

1056449 thanks, concerning the 4X4 i checked around and there did not appear to be anyhting out of place. :-? It is really BS though I believe my 87 straight 6 is a 4.2 liter and i have read that replacing the rear main involves lifting the engine. . . :-P so, hopefully it is not that...

1056480 THanks, are all the hoses pictured running on the undercarriage?[addsig]

1056501 To add my 2 cents, the 4wd indicator on my dash is NOT going on. And now that I think about it, last time I successfully engaged the 4WD, I had a hard time disengaging it. . . in other words I pushed the stick it 2wheel and the 4WD dash indicator stayed on, and did not go off until...

1056503 Thanks on the leakage issue. I was finding oil in my air cleaner until i replaced the grommet, but i am not sure if i have the proper hose feading out of the grommet (and I know i am missing the elbow valve that comes out of the grommet). The PCV is also gummed up pretty good, i...

1056606 Thanks guys, I will let you know what happens.[addsig]

1057812 On the leak(s) I replaced the PCV and some length of hose attached thereto, which was all gunked up- now there appears to be some better flow, which seems to have helped with the leak, at least there is less of a pool after i park the jeep. It is really only a bunch of drops now...

1057959 Morgster the engine diagram would be great. . . the steam/leak is not coming from the coolant, it is coming from below the air cleaner, around where i replaced the PVC hose. . . It is like a cartoon, out your finger on one leak and another one sprouts up!! [addsig]

1057960 I have been having some engine problems///leakage, so i was looking for a mechanic or some one with a jeep around the same year as mine so i could check their set up out[addsig]

1057970 Yeah Morgster, I replaced the PCV valve and some of the hose connected thereto. I sent you a PM with my e-mail on the need of the vacuum hose diagram. The new leak is around the area of the replacement hose (i.e. under the air cleaner assembly). On my Jeep the PVC hose runs to a...

1057974 Yeah I have been thinking of doing a radiator flush. . . as well as an engine flush there is so much gunk everywhere. . . i changed the oil and it is turns black almost immediately[addsig]

1057976 Yup Oil LEAK(s) maybe the rear main, not sure yet 10w-30, sometimes 40 I have been using the board, and buying parts myself. . . I am going to try and swap most of the engine hoses i have replaced a bunch already, some just disintegrated when touched (dry rot). . . if that does...

1057981 20w-50 Sounds good, i am dumping about 4-6 quarts a week, so anything should be an improvement :lol: [addsig]

1057985 Yeah NO S$%#^ that is a lot of oil. I replaced the PCV valve last sat and replaced some hose that was completely clogged with oil resin. I think the rest of the hose remains clogged though (the hose that runs to the PCV valve) So, for about a day the leaks were contained for short...

1057989 i think i am just going to replace it all the way to the T Hey, do you know where the hose from the grommet goes? (which controls flow through other end of valve cover)[addsig]

1057996 WOW, that sounds the same as where some of the oil is leaking in my jeep, and the cap is definately loose! I will try that. I know that oil is leaking from elsewhere too but it is all over the front too thanks[addsig]

1057998 Jay, I am talking about the rear grommet (closest to fire wall). . . the hose goes to the air cleaner? What is an external breather? [addsig]

1058000 Hey Morgster, I did not get the diagram? jwg@lawwmm.com thanks again funny story about the tape cassette BTW :lol: [addsig]

1058023 sounds good, a pic would be great, jwg@lawwmm.com thanks[addsig]

1058035 thanks, i dont think i got the pics yet, i am refraining from professional help (i.e. spending $$$) to fix it. . . i am going to try an fix it myself, replace the hoses and what not i know that i have the grommet hose going in the wrong direction[addsig]