Search results

  1. M

    Egr Valve Help!!

    warpedredneck, are you saying the actual EGR valve is sticking not the transducer? maybe i'll take the "EGR" valve out and play around with it, that will require me replace the gasket that sits around it, should only be $2 anybody have any other thoughts?
  2. M

    Egr Valve Help!!

    i have a 88 Jeep cherokee 4.0L inline 6 and i cant figure out this EGR Valve Vacuum transducer, it has a total of 3 hoses connecting to it. one on the left and right, and one at the bottom. the hose that connects to the bottom of the EGR Valve Vacuum transducer is melting the connection i...
  3. M

    Overflow 88 Cherokee

    Hey i had the same problem I have a 88 Jeep Cherokee and i have done tons of work to this thing. i replaced the water pump about 2 months ago and thermostat about a year ago. i cant quite remember how long ive had this problem but i think ive had it for about a year if not more. what seems...
  4. M

    hesitation when stepping on the gas

    I had the same problem with my cherokee, i tried number of things to fix this problem. first lets start with the cheapest solution 1. Fuel Injector cleaner - Does more then you'll know 2. the MAT sensor (manifold air temperature) this is located under the hood, on the drivers side its pretty...
  5. M

    PLZZ HELP Idle problems and stalling

    Please help another problem which i am stumped on, i have a 1988 jeep cherokee 4.0L manual transmission and gosh, thats pretty much the word i have to descibe the pain i'm in "gosh" What seems to be happening is that when its "COLD" when i just start it the idle seems to be "okay" but i'll...
  6. M

    Cant engage in grear

    HEY!!!!!!!! good news i smell the dot 3 brake fluid on the carpet, so......... it must be my master cylinder. any tips on how to replace this bad boy? i have the haynes book, but any other tips would be greatly appreciate
  7. M

    Transmission Problem??

    ive had this same problem with my jeep cherokee 1988. I couldnt figure out what the f*** was wrong with it, i tried replacing the electric fuel pump because i figured that might be cutting out for a milisecond, after spend $150 i found out all it needed was simple fuel injection cleaner! i did...
  8. M

    Cant engage in grear

    I found the master cylinder but what is this slave cylinder everybody is talking about? i dont really see any fluid leaked onto the fuse box or on the carpet but the rubber kinda looks wet but uncertain, obviously the fluid is leaking somewhere, i looked underneath the truck to see if i can see...
  9. M

    Cant engage in grear

    i have been refilling the master cylinder within 3 weeks.............. where is the master and Slave Cylinder? do i have to take out the whole transmission to replace any of these parts?
  10. M

    Cant engage in grear

    re I have a 1988 Jeep cherokee and i cant engage into gear unless i rebleed the clutch or if i top of the master cylinder with new brake fluid. where could this fluid be leaking?
  11. M

    Road Nose Help

    I recently just posted this I have a 1988 Jeep Cherokee and it has this nose that gets louder when I go faster. Its constant but you really can’t hear it when your going 50km and below but it's still there, but once you go above 50km/h your can really hear the "WHOM WHOM WHOM" sound it’s...
  12. M

    How to change Front Hub & Bearing on Cherokee

    I recently just posted this I have a 1988 Jeep Cherokee and it has this nose that gets louder when I go faster. Its constant but you really can’t hear it when your going 50km and below but it's still there, but once you go above 50km/h your can really hear the "WHOM WHOM WHOM" sound it’s...
  13. M

    Noise WHY!

    No its not my tires because they're just stock tires, no lift or anything fancy, i first thought it would the tires but its deff not
  14. M

    Noise WHY!

    I have a 1988 Jeep Cherokee and it has this nose that gets louder when I go faster. Its constant but you really can’t hear it when your going 50km and below but it's still there, but once you go above 50km/h your can really hear the "WHOM WHOM WHOM" sound it’s hard to explain but it...
  15. M

    HELP! Peugeot BA10 5-speed manual transmission

    1055918 AAAAAAAAAH MAN I have finally got the exhaust out which was crap because the bolts were rusted on it which I had to torch them off. I'm finally going to be taking out the transmission tomorrow I just hope I can remember how to put the whole thing back together again. The reason why...
  16. M

    Some advice???

    1055919 heres a good tip for ya, check what kind of transmission you have. pray to god that you dont have the Peugeot BA10 5-speed manual transmission. FRICK!!! I have read many reviews how bad and horrible this transmission is go to this site http://www.carsurvey.org/review_9922.html theirs...
  17. M

    HELP! Peugeot BA10 5-speed manual transmission

    1056584 I got the AX 15 with bellhousing, transfer case with spline 23, clutch and pressure plate. he said theirs not cross member, can i just use my old cross member? what else do you think i need? i havnt bought it yet. he told me the ax-15 is coming out of a Jeep XJ like you said. can...
  18. M

    HELP! Peugeot BA10 5-speed manual transmission

    1056623 Do you think you can give me a list of supplys i should be asking for? so for i have these items. 1. AX-15 Transmission 2. BellHousing 3. Clutch 4. Pressure Plate 5. Transfer Case can you give me a "WHAT I NEED LIST" please, i'm buying this transmission this weekend and i have no...
  19. M

    HELP! Peugeot BA10 5-speed manual transmission

    1056859 i have a new clutch and pressure plate, but i read all thoughs reviews and i dont understand what they're talking about. this is what i know i need so far "what i need list" 1. Shifter 2. Transmission Cross Member 3. Transmission mount "i have list" 1. AX15 transmission 2. pressure...
  20. M

    Transmission swap HELP!!!!!

    1062115 responding to Well this could be several things.... A) it could be your throwout bearing...Did you put in a new one with your transmission? B) Did you replace the clutch and pressure plate as well? And the flywheel...did you at least have the flywheel resurfaced? Thats what I can...
Back
Top