Search results

I used to have an old Land Cruiser, and it had a funny sound with the same characteristics, It turns out there is a rinaround the pinion on the rear axle, and it will get loose and spin while driving(sounds like you decribe). i do not know whether they have this on your Jeep, but might be worth...

If it goes away whe you stop then it could be a brake hung, or a brake issue. JOE>

I use a wire tester, and find a good ground and just turn the key on and strart checking the wires near the area you need it in. Then whe you get a hot one just turn the key and see if it is still hot, you will be able to tell the good ones when they go on and off with the switch. If you are...

I have a 99+ intake for sale, I had it on a 97 zj 4.0, but it is now off and I have a 99 XJ so I will no longer need it, PM me if interested. Pics upon request. JOE>

I like the way Jeeps look myself. JOE>

Sounds dangerous, have you checked the TPS(Throttle Position Sensor), that could be it, the motor mount sounds like it could be the prob too, give us more info as you figure this one out. Good luck, JOE>

I had about the same prob with a Zj i have, it turned out to be the Stabilizer, but I would not rule out checking the tires to see if there r some flat spots. The way I checked the stabilizer was I found a place here near where I live( bump in the road that always made it shake) and every time...

Man Lung, your rear springs are bending the wrong way. ;) JOE>

:???: Well I watched hoping to see carnage but nothing, I mean seeing some rookie moves up and down the sand hills was cool, but not smart and he really does not care about the Jeep. JOE> P.S. The engine or exhaust sounded sick(bad sick :redface: not good sick), just my .2

You should switch it over to BPE (Bar Pin Eliminators) to keep from having to do all the drilling and tapping again. Good Luck. JOE>

So what you are looking for is a better gauge cluster, If tit I found mine a a junk yard for 20 bucks, I had a 94 XJ at the time. i have a Zj now and the gauges in it r just fine. :D Good luck. JOE>

That souds like it could be it^^^, and there might be a filter seal on underneath the new oil filter, I had that happen to me on an old Honda I had. Good luck JOE>

I have, I did this nod to a 94 XJ I had, and it is still on there, and the guy is diving it every day. it's not all that hard, but you will have more road noise(that guy I mentioned could not take it so he put some of the carpet back in),but it did not bother me much, you will also have alot...

No biggey just wanted to throw it out there. Kinda new to this forum and want to share what I have. Thanks JOE>

Well I did them at the same time, to save time, but they both together made a very pleasant improvment. I would do it again. JOE> Just for s,g here is the linkk I used to help me figure out what I was dealing with. : http://go.jeep-xj.info/HowtoIntakeManifold1.htm

Did a search to see if I could find this but no luck so if it's been done then sorry. N.E. who there is a larger filter for the 4.0 that will allow you to add another qt. of oil, which means 7qt. cap. The part # is 1773 from Napa, I use the Napa Gold line with that part #. I did not do the...

i have never had it happen to me but you might be able to buy these things, i call em' a nutcert, they go into a hole and when you crank the bolt into the nutcert it spreads out and locks it down, it is very hard to find them (at least around here it was.) but you can if you look hard enough...

Yep thats just it they want ot see how many wierd positions they can get you into, HAHA. But really they r pretty hard to do on your own, I put the rear tire swing out bumper on a 94 XJ, and it was quite hard solo. Good luck though,. JOE>

Sounds just like a friend of mine, he came over with this wild vibe/ wobble/ irritating crap. I took it to the shop and looked at some stuff(bushings, transmission mount, ext.) I ended up taking the front shaft, and disconnecting it from the pinion, bugee it out of the way and drove it, and the...

Just finished the 99+ intake / Banks TT insatll on my 97 ZJ 4.0, and I must say nothing but good from that install. I love the extra power, as well as the smoother acceleration. I Recomend it to anyone who wants a pretty strait forward install and a fun weekend at the shop. I will say that you...