Search results

test the starte on the bench or on the ground with a set of jumper cables. If it works under those conditions it should work in the car if the battery is strong.

Rich, I have a 92 cherokee laredo that is giving me the same problem. I solved a similar problem 4 years ago by simply cleaning the neutral safety switch. They are cleanable. However, a few months ago the bolts that hold the flywheel and the torque converter fell out, I had that repaired and...

my first post was somewhat misleading I suppose. I have actually replaced the OEM pump. In the process of installing the new one I discovered that the new unit would not register on the gauge. After 8 attepmts to re-install it I discovered that the float was in a different position than the...

thanks for the help. my jeep is a 1992 cherokee laredo.. 4.0 litre engine

I recently installed an aftermarket fuel pump assembly and found that the gauge wasn't reading. The OEM unit would read but was never accurate. After 8 attempts to install the new unit I decided to align the float in a position that would match the oem unit. I was able to get it to read but...

Thanks to all of you for the advice. I'm gonna pull the engine tomorrow, check the rods and mains, replace all the seals and gaskets and do whatever. Hope we find the problem.. Thanks again.

I bought the vehicle as a 92. the engine is a 6 cylinder and all the parts that I buy for a 4.0 seem to fit. i replaced the vibration dampener a few years ago with an aftermarket " Dorman " brand. It doesn't appear to be rubber mounted like the OEM unit that failed. Yes it is mis-firing and...

I have a 92 with a 4.0. It has some serious low end noise. sounds like a main or rod bearing but we have been driving it like this for about 1 1/2 years and it seems that if a rod was knocking or a main bearing it would have come unglued by now. I thought it might be a vibration dampener but...

Lenny, I live in Northern Utah, worked at the North Rim in 1959, made a trip to the North rim last summer. Didn't hike the canyon this time but after staying a couple of days i returned by way of Bryce Canyon, Escalante, Capitol reef, Bicknell, Loa, Castledale, Price and then west to I-15...