How to trouble shoot 4WD indicator lights on instrument panel (next to speedo)

Barrett

New member
The 4WD indicator light s are not working on my 95 YJ and I would like to learn how to troubleshoot them so I can get them working again.

Does anyone have experience in this regard?

Care to share? Dash Instruments.jpg https://postimg.cc/image/ozc8ah0vj/

Thanks!
 

It's an electrical switch on the vacuum disconnect motor attached to the front axle. The problem is most often a vacuum leak not allowing the vacuum disconnect to function as designed.

An easy test is to remove the 4 bolts holding the vacuum disconnect to the front axle (passenger side). With the key in the run position (engine off), move the shift fork by hand and see if the dash light activates.

In the '95 YJ, if the dash light isn't activated, good chance the front axle is not engaged, leaving you with 2wd.

Post up what you find.
 
Back
Top