Thread: A YJ for my Dad

  1. #1
    Join Date
    Oct 2011
    Location
    Millersburg, Oh
    Posts
    490

    A YJ for my Dad

    I thought Id put up a build thread on the 1990 YJ Sahara Im building for my Dad. He bought the Jeep in 2015 or so, he drove it in the summer of 15 and 16 then had issues with it and parked it. Fall of 19 he decided he wanted it fixed up and turned into a driver.

    What I started with:
    -1990 YJ Sahara
    -carbed 4.2
    -Ax-15 with internal throwout bearing (that leaks)
    -3 body lift (&#129326
    -damages front fender

    The plan:
    -Holley efi
    -Advance adapters external slave cylinder upgrade (new bell housing etc..)
    -Flat fenders
    -Rocker protection
    -New exhaust
    -Change 3 body lift for 2 suspension and 1 body
    -Fix rust on tub
    -Spray line inside and out.

    A YJ for my Dad-img_1159.jpg
    A YJ for my Dad-img_1160.jpg


    Sent from my iPhone using Jeepz.com mobile app
    Just
    Empty
    Every
    Pocket

  2. #2
    Join Date
    Oct 2011
    Location
    Millersburg, Oh
    Posts
    490

    Re: A YJ for my Dad

    The Jeep came with a hardtop and 3 different sets of doors, my Dad settled on the half doors and I found the slider uppers on Craigslist.


    Sent from my iPhone using Jeepz.com mobile app
    Just
    Empty
    Every
    Pocket

  3. #3
    Join Date
    Oct 2011
    Location
    Millersburg, Oh
    Posts
    490

    Re: A YJ for my Dad

    A YJ for my Dad-img_1161.jpg
    A YJ for my Dad-img_1162.jpg

    Started by replacing the factory gas tank skid with a Warn hd skid. Also replaced the rotting exhaust with a Banks Monster exhaust (91-95 yj, fits the 90 just fine.

    A YJ for my Dad-img_1164.jpg
    A YJ for my Dad-img_1165.jpg
    A YJ for my Dad-img_1166.jpg
    A YJ for my Dad-img_1168.jpg
    A YJ for my Dad-img_1169.jpg
    A YJ for my Dad-img_1172.jpg
    A YJ for my Dad-img_1173.jpg

    This was the front flat fender adventure, a lot of by guess and by golly with a grinder and I got them fitted up nicely.


    Sent from my iPhone using Jeepz.com mobile app
    Just
    Empty
    Every
    Pocket

  4. #4
    Join Date
    Oct 2011
    Location
    Millersburg, Oh
    Posts
    490

    Re: A YJ for my Dad

    A YJ for my Dad-img_1191.jpg

    We started with dumbo style Xenon fender flares someone thought looked good and the factory body mounted side steps...

    A YJ for my Dad-img_1192.jpg
    A YJ for my Dad-img_1193.jpg
    A YJ for my Dad-img_1194.jpg
    A YJ for my Dad-img_1195.jpg

    ...and went with these metal narrow rear fenders.




    Sent from my iPhone using Jeepz.com mobile app
    Just
    Empty
    Every
    Pocket

  5. #5
    Join Date
    Oct 2011
    Location
    Millersburg, Oh
    Posts
    490

    Re: A YJ for my Dad

    Then it got fun, what should have been a simple 1 hour job turned into 3 days of fun and adventure when it came time to ditch the 3 body lift. The frame on this Jeep is immaculate no rust looks showroom new so I figured the tub would be very clean...
    A YJ for my Dad-img_1212.jpg

    This is metal rusted to plastic...which isnt possible but yea. 3 of the 9 mounts unbolted the others fought me tooth and nail but in the end I won.

    A YJ for my Dad-img_1242.jpg

    I went with Daystars 1 body lift/polyurethane body mount kit.

    A YJ for my Dad-img_1244.jpg
    A YJ for my Dad-img_1243.jpg
    A YJ for my Dad-img_1245.jpg
    A YJ for my Dad-img_1246.jpg

    I went with a BDS suspension 2 spring lift front and rear. I did add Rough Country front sway bar disconnects as the factory ones are shorter than I liked. I will also be adding Crown extended brake hoses as Im not a fan of the relocation brackets.


    Sent from my iPhone using Jeepz.com mobile app
    Just
    Empty
    Every
    Pocket

  6. #6
    Join Date
    Oct 2011
    Location
    Millersburg, Oh
    Posts
    490

    Re: A YJ for my Dad

    My dad didnt want the hardtop as hes not driving this in the winter when its done. So I got creative, I decided to add a bowless TJ soft top...

    A YJ for my Dad-img_1312.jpg
    A YJ for my Dad-img_1314.jpg
    A YJ for my Dad-img_1441.jpg
    A YJ for my Dad-img_1424.jpg
    A YJ for my Dad-img_1445.jpg

    I found a TJ in my local wrecking yard (much to my surprise) I cut the top retaining bits off the tub and drilled out the spot welds before welding them to the YJ tub.

    A YJ for my Dad-img_1446.jpg

    Scored the doors surrounds from same TJ for $10, here they are located on the YJ where I drilled out holes to accept them.

    A YJ for my Dad-img_1447.jpg
    A YJ for my Dad-img_1448.jpg
    A YJ for my Dad-img_1450.jpg

    I used a Rampage header and top, this is where I had a moment of not thinking and ordered a tan top. I will be dying the uppers to match and making some top supports the clamp to the cage to lift the back of the top over the rear seat. Right now it looks like a CJ rally top that wont last.



    Sent from my iPhone using Jeepz.com mobile app
    Just
    Empty
    Every
    Pocket

  7. #7
    Join Date
    Oct 2011
    Location
    Millersburg, Oh
    Posts
    490

    Re: A YJ for my Dad

    This about where I ran out of warm weather and I wanted my garage space back...
    I have the advance adapter kit and a new clutch to swap in, however I will drop the the exhaust from down pipe and cat which is so rusty it needs replaced. I will probably replace the manifold due to rust as well at the same time. Also when I lowered the body it took out the seal in the steering box which needs replaced, I have a Fabtech steering box skid plate to install when I do that in the spring. I will be installing an efi kit and spray lining it as well at that time so stay tuned.


    Sent from my iPhone using Jeepz.com mobile app
    Just
    Empty
    Every
    Pocket

  8. Re: A YJ for my Dad

    Nice build. Your dad must be very happy with this build.

  9. #9
    Join Date
    Oct 2011
    Location
    Millersburg, Oh
    Posts
    490

    Re: A YJ for my Dad

    Quote Originally Posted by tondestr View Post
    Nice build. Your dad must be very happy with this build.
    Hes liking it so far, hes impatient with me for not getting started it on it yet this year. Ive built him a couple of Jeeps in the past,

    2001 XJ
    A YJ for my Dad-image1616096267.488909.jpg
    A YJ for my Dad-image1616096286.224054.jpg

    1973 CJ5
    A YJ for my Dad-image1616096359.398770.jpg


    Sent from my iPhone using Jeepz.com mobile app
    Just
    Empty
    Every
    Pocket

  10. Re: A YJ for my Dad

    Quote Originally Posted by eric m View Post
    He’s liking it so far, he’s impatient with me for not getting started it on it yet this year. I’ve built him a couple of Jeeps in the past,

    2001 XJ
    A YJ for my Dad-image1616096267.488909.jpg
    A YJ for my Dad-image1616096286.224054.jpg

    1973 CJ5
    A YJ for my Dad-image1616096359.398770.jpg


    Sent from my iPhone using Jeepz.com mobile app
    Wow. Your that is very lucky. Those Jeeps look amazing.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in