Recent content by josh94yj

wow thanks!! was just wondering about the kits bc i want more travel, but i do agree that leafs are QUITE durable!! think i might just do a shackle reversal kit and a SOA. But i have to get smaller springs, the 4" springs i have on it now will be WAY to high with a SOA kit!!

44's seem line a pain to me!! and it is still the BEST way to do a crush sleeve is to replace it versus reuse it! but its ok, its not my axle so i dont mind if its half done and parts are reused. Personally when i do ANYTHING to my vehicles (or customer vehicles) i make sure it is done in the...

if the CTS is sending the wrong temp signal to the computer then it could be telling it the motor is cold and overfueling (kinda like the choke with a carburated motor)

rotella and mobil 1 are my favorite oils!! i use mobil 1 in EVERYTHING in my jeep as well as the rest of my cars. and i run 10-30 in my YJ 4.0

at least the oil pan is only 8 more 8mm bolts though! could be worse! for rangers you have to drop all kinds of stuff!!!!! including axle parts lol

I run NOTHING but MOBIL 1 or ROTELLA full syn oils!! and not just in my jeep but all 4 of the vehicles i currently own, and every car i've owned since they came out. I switched my jeep to mobil 1 when i bought it (108k miles) and when i took it out to hop the 4.0l up to over 300hp it was the...

well honestly the rear pinion is a pain if you do it RIGHT! most ppl just pull yoke off and change the seal, but thats an REALLY GOOD way to RUIN your rear end! the pinion nut is what crushes the crush sleeve and puts preload on the pinion gear. if the crush sleeve is reused and not crushed at...

hey, we need to plan a mud trip sometime in enough advance that i can take off work and try to trailer my jeep up there (just in case something happens!! lol)

hahah idk why!!! full spools are SO much fun on hard dry ground!!!! LOL you should drive mine in 4wheel next time you come down and see what I mean hahaha

LOL so much for PAINLESS huh??? some kits require certain parts to be upgraded, make sure that your kit does not require you to update your tach pick up or your tach

not real familiar with HEI, is the COIL built in the dist or no? and the coil could be breaking down, i bought 2 screamin demon coils and BOTH were pieces of crap (this was a few yrs back though not sure if they've improved any) and would idle fine but break down while driving and reving the...

a lil lol

put a full locker in it :) haha

is it water, or antifreeze? if its water and it happens while running the a/c then clean out the drain tube, if its antifreeze then your heater core is most likely leaking. and if its from rain then the cowl drain tube is probably clogged, i got about 6inches worth of PACKED in mud out of the...

they also have high performance booster and master upgrade kits, depending on how much brake boost you want, im looking at getting some brake upgrades for my YJ, the bigger and heavier the tires the harder they are to get to stop turning! lol