Teraflex Jeep spare tire spacer

TerryMason

Administrator
Staff member
Teraflex Jeep spare tire spacer

I’ve been running 31” tires for some time now and my spare tire has never really fit on correctly. I put a stack of washers between the tire and the carrier, but it still made contact with the third brake light. So, I wanted a better solution that would look good and correctly position my tire. After some research I found the Teraflex Spare Tire Extension Bracket, part number 1907200

Overall I like the bracket, but it does raise the tire a few inches. This is great for larger tires (i.e. 33") but not necessary for a 31" tire. The effectively blocks the third brakelight.
 

Teraflex TJ / JK spare tire extension bracket

You can see from the photos that this bracket not only spaces the tire away from the carrier, but also moves it up a bit.
 

Attachments

  • bracket-from-teraflex_jeep_spare_tire_spacer.jpg
    bracket-from-teraflex_jeep_spare_tire_spacer.jpg
    129.4 KB · Views: 1,153
  • jeep-tire-spacer-instructions.jpg
    jeep-tire-spacer-instructions.jpg
    206.9 KB · Views: 1,470
  • bracket_jeep_spare_tire_spacer.jpg
    bracket_jeep_spare_tire_spacer.jpg
    130.1 KB · Views: 1,706
Before photos

Some shots of the stock TJ tire care on my 2005 Wrangler. You can see that there isn’t much room between the tire and the 3rd brakelight
 

Attachments

  • before_jeep_spare_tire_spacer.jpg
    before_jeep_spare_tire_spacer.jpg
    97.6 KB · Views: 1,743
  • before-install_jeep_spare_tire_spacer.jpg
    before-install_jeep_spare_tire_spacer.jpg
    81.6 KB · Views: 446
  • before-install2_jeep_spare_tire_spacer.jpg
    before-install2_jeep_spare_tire_spacer.jpg
    94.3 KB · Views: 354
  • before-carrier_jeep_spare_tire_spacer.jpg
    before-carrier_jeep_spare_tire_spacer.jpg
    87.3 KB · Views: 1,323
Mounting the spare tire bracket

The mounting bracket is pretty straight forward. You bolt it to the carrier using the stock stud along with the supplied washers, lock washers and nuts.
 

Attachments

  • mounting4_jeep_spare_tire_spacer.jpg
    mounting4_jeep_spare_tire_spacer.jpg
    89.2 KB · Views: 305
  • mounting5_jeep_spare_tire_spacer.jpg
    mounting5_jeep_spare_tire_spacer.jpg
    87.5 KB · Views: 471
  • mounting3_jeep_spare_tire_spacer.jpg
    mounting3_jeep_spare_tire_spacer.jpg
    65.5 KB · Views: 485
  • mounting2_jeep_spare_tire_spacer.jpg
    mounting2_jeep_spare_tire_spacer.jpg
    97.3 KB · Views: 456
  • mounting_jeep_spare_tire_spacer.jpg
    mounting_jeep_spare_tire_spacer.jpg
    65.4 KB · Views: 444
  • teraflex-spacer_jeep_spare_tire_spacer.jpg
    teraflex-spacer_jeep_spare_tire_spacer.jpg
    93.5 KB · Views: 677

Finishing up

Then bolt the old Wrangler spare tire back up and you’re good to go.
 

Attachments

  • tj-bracket_jeep_spare_tire_spacer.jpg
    tj-bracket_jeep_spare_tire_spacer.jpg
    139.1 KB · Views: 7,239
  • finished-mount_jeep_spare_tire_spacer.jpg
    finished-mount_jeep_spare_tire_spacer.jpg
    94.9 KB · Views: 2,161
  • mounted_jeep_spare_tire_spacer.jpg
    mounted_jeep_spare_tire_spacer.jpg
    97.4 KB · Views: 405
Conclusion

Overall this is a good bracket, but you’ll have to purchase or fab up a new 3rd brake light. You can see from the before and after photos below that this bracket causes the tire to cover the light. This is good for a larger tire in order to keep it off the bumper, but for my smaller 31” isn’t not necessary.

I do however think this is a well made, sturdy bracket.
 

Attachments

  • before-install_jeep_spare_tire_spacer.jpg
    before-install_jeep_spare_tire_spacer.jpg
    81.6 KB · Views: 360
  • finished-mount_jeep_spare_tire_spacer.jpg
    finished-mount_jeep_spare_tire_spacer.jpg
    94.9 KB · Views: 989
  • before_jeep_spare_tire_spacer.jpg
    before_jeep_spare_tire_spacer.jpg
    97.6 KB · Views: 518
  • after_jeep_spare_tire_spacer.jpg
    after_jeep_spare_tire_spacer.jpg
    90 KB · Views: 580
I've got the bracket on my 2009 jk, ez to put on only thing the tailgate won't hold up to the bouncing support is on the tailgate and the spot welds gave away. I'm looking to replace bumper that come with tire carrier so the support is on the bumper not the tinny tailgate.
 
Back
Top