Search results

I have a stock sway bar and endlinks and wanted to put pins in like this. Jeep Homemade Swaybar Disconnects My question is with a lift can i do this with my stock endlinks. I am worried that if i disconnect the links that they are under pressure cause of the lift. If i disconnect them will i...

The evap system uses the fuel vapor that is collected to start the engine. If there is a problem with the evap canister then the ECU will pull in air not fuel vapor. causeing the engine not to start from cold. Have your mechanic check the Evap canister, he may have unplugged a hose from that or...

I own a 89 ford F150 with the 300 six in it. It has the ORIGINAL wires cap and plugs. 168k I bought new wires thinking why not. The new ones died after a week so i had to put the old ones back on to drive it. That was two years ago and i still havent replaced them again.

Could be a crack in the manifold to if it looks like its coming from under the intake

Wrangler, hands down. The cherokee can hold its own offroad, as can the wrangler. In the stock form the wrangler will go twice as far. It has better ground clearance better approach angles. A convertible top and removable doors. Unless your worried about the cargo room I think that you would be...

That really sucks, I have no ideas as transmissions really scare me.. However I just finished putting the whole top end of my motor back on and got to take her on a nice cruise to the beach.... Ah jeaulosy

Also a bored out 4.0 liter jeep throtle body makes some serious difference on the neon motor

A dodge neon motor that was turboed should fit

thank you guys that helped out alot

Seriously none of you 15 guys thats veiwed already? Someone should go look at there jeep. Or send me a good picture I cant find the line that gos on that and im pretty organized so i dont know how I lost it ir messed this up but any help would be cool.

I just got done doing the head gasket on my 99 wrangler. When i got everything back together i was double checking the vacuum and electrical connections to make sure i didn't miss anything. I dont know were this outlet on the side of my intake manifold goes to, i remember taking three off of...

oh yeah headers cant forget the headers... rugged ridge makes a nice set for the buget buyer, they can be had for like 179 or around there if you look a lil

Port and polish the head, make sure they "port match" your head. Should run you about 400 bucks ... then get a cold air intake, dummie O2 sensors and a nice flowmaster cat back system and a newer highflow cat or trash the cat alltogether if you dont need to worry about emmisions. That should...

you can gain about 40 horespower and 3-4 miles to the gallon if you get a newer intake of a 4.0 and have the channels filled in the right spots... Its an easy swap and you can get the 4.0 head off ebay ready to install for like 350. Look here to buy it and here to install it Hope this helps

Anyone? all 16 of you looked? no input? weird.

this store is gone idiot

I have a 99 wrangler with a stock clutch fan. I was wondering if its possible to change this to a standard fan that goes when the engine does. I dont like the idea of the clutch fan and its ability to fail... I also want to lower the temps on this rig cause i live in a much hotter climate than...

how much over stock can you expext with a new header and muffler? HP and tourqe wise?

I had a 2000 sport with a 4.0... The cat got plugged up so i hollowed it out, then i unbolted the muffler from the cat, i cut the pipe as close to the muffler as i could with a sawzall. I then shoved the flange into a cherry bomb glasspack and welded that together... bolt it all back up and...