Search results

Yeah, The fast idle cam was set in too much. I put 2 throttle react springs back on this carb. Whenever i get on the pedal and then let off it takes awhile for the rpms to go back down to idle. or at least longer than it should. On the electric choke, how much do you have the choke plate...

I had same symptons once on my cj7. I replaced the starter and solenoid, still nothing. Then I really cleaned up the terminals and connectors. Still nothing. Next day started on the first try, I was baffled. Drove it to get gas and wouldn't start back up. The battery ground on the block...

8) That looks wicked!! :twisted: Black on black looks cool and the swampers really fill the space. Looks great, can't wait to see it finished.

SWAMPER LTBS No it doesn't idle down after it is warm. I don't have a choke of anykind hooked up to it right now. Well the electronic choke is on it but I don't have it hooked up. I had a big vacuum leak on the back side of the carb base :oops: so I disassembled and used gasket sealer...

I just put my 2150 on today. Everything went smoothly and was able to get it running. The problem is as soon as my jeep starts up, The Idle speed is super high like maybe 4000 rpm or so(I don't have a tach). I can almost close off the mixture screws and it still idles that high. I can...

Can anyone help on these carb issues? I'm putting it on in the morninig and I would like to have what parts I need in the beginning. Even a go to hell would be nice :D

3rd brake light gone How did you guys deal with the choke issues on these 2150's? Did you use electric chokes or attach a manual choke? If the later is so where on the choke linkage did you attach the cable? Oh yeah, the choke plate should always be open unless the choke is engaged right...

Wrangler Value Tommy lee Jones drives 2 jeeps in"Coal Miners Daughter" One is an old military jeep the other is a 70's cj

Does anyone have a copy of 2150 explode view they could post? I know they come with the rebuild kit, but I can't spend that much right now. O'riellys wants 30 some bucks for it. I would mainly like to identify some parts. I got the adapter today and will probably install the whole thing...

sorry, try this: http://photos.yahoo.com/designer032003

I made some past referencing in this site and many others on spotting these and lookin for the right one out of many makes at a salvage yard. This one came from a (door said) 1983 LTD with I think a 3.8 6cyl. It had grime only years hidden under the air box and hoses. The ID tag on the...

It runs ok down the road. Its just when accelerating quickly it sputters and hesitates. Right as that stops acceleration drops to a very low rpm rate then clears out. I have made many adjustments of the mixture screws but I really need to find that sweet spot by adjusting tabs under the...

So, since my wiring would be set up to read a stepper motor and I don't have one then am I missing out on performance? I would think the stepper motor would help in idling and smoother acceleration, but what do i know about it. never had one.

Thanks for replying. I recently rebuilt the carb. The venturi tubes were all clear before and after the rebuild.

I was just checking out some of the previous posts about this carb. There was alot of attempts to smooth it out with the mixture screws. Does anyone know how to set the pump assembly position and vacuum assembly piston position (under the dust cover assembly)? I have the factory specs but...

Hi everybody. I am recently new on the boards and have a few questions to get my jeep a little ironed out. I've seen some of the 2150 carb posts and plan on converting over to it but for now I'm just trying to smooth my carter out. I was wondering what years did the carter bbd come with...