redrooster
New member
Does anyone know of a rotor that will fit over the axle flange on a Scout Dana 44 without machine work?
I did this several years ago when I was running those axles, but I machined a set of Dodge rotors to fit. Then used the weld-on brackets with GM calipers and pads.
I've got a friend who is attempting to "budget" build a set of these axles.
I did this several years ago when I was running those axles, but I machined a set of Dodge rotors to fit. Then used the weld-on brackets with GM calipers and pads.
I've got a friend who is attempting to "budget" build a set of these axles.
