Day 5

[XJReaper]

Got the jeep all back together. Started her up and had to replace crank position sensor. Now she isn't idling true. And when driving she loses power then will have a hard time slowing it's running idle.

Sent from my [device_name] using Jeepz.com mobile app

 

[XJReaper]

Got the jeep all back together. Started her up and had to replace crank position sensor. Now she isn't idling true. And when driving she loses power then will have a hard time slowing it's running idle.

Sent from my [device_name] using Jeepz.com mobile app

Anybody have any ideas?

Sent from my [device_name] using Jeepz.com mobile app

 

[JPNinPA]

Check the vac lines.
Clean the TB and IAC
Check the TPS connector.
While cleaning the IAC actuate the butterfly valve 30-40 times to loosen debris or free the TPS..


JPNinPA
Using Jeepz.com app

 

[XJReaper]

Check the vac lines.
Clean the TB and IAC
Check the TPS connector.
While cleaning the IAC actuate the butterfly valve 30-40 times to loosen debris or free the TPS..


JPNinPA
Using Jeepz.com app

Will check it all today.
So far I've had to have a rental for a week longer then I was supposed to. Getting expensive. Really hoping I get this done soon.

Sent from my [device_name] using Jeepz.com mobile app

 

[XJReaper]

Will check it all today.
So far I've had to have a rental for a week longer then I was supposed to. Getting expensive. Really hoping I get this done soon.

Sent from my [device_name] using Jeepz.com mobile app

So upon further inspection I found the pcv elbow was broken. I picked one up with carb cleaner and a Hanes Manuel. I looked up the vacuum diagrams for the i-6 and they don't even match up with the engine.
So I'm going to do what I can in the rain today and cross my fingers.

Sent from my [device_name] using Jeepz.com mobile app

 

[JPNinPA]

Return the Hanes manual try to find a factory service manual. They are pricey but are the best investment.

Google vac diagram for the year and engine to find the diagram quickly.


JPNinPA
Using Jeepz.com app