Just bought Motorcarft 2150 for 85 cj yes another question

[Platsmith]

RE: Re: another dumb request...clutch...

Just bought my carb and have the double stage power vavle and everthing elst I need to set up my new carb so I can finally run right. Here is my qauestion what do I do the all the vaccuum lines and with the pulse air system. This is then only thing that I have not been able to get alot of info on. I am hoping that this will get rid of a ton of the vaccuum lines on this thing. Thanks for all the help.
Randal

 

[SenorCole86]

I took mine off. I plugged the holes in the original bolts that held the air injection manifold on with smaller nuts and bolts, then put them back in. Make's my engine a lot louder, but it worked. I took the air pump off as well, since you won't using it anymore. All I have hooked up to my 2150 is the vac advance (goes to diaphram next to distributor), the pvc vent (goes to pcv valve), and power vavle (gets straight manifold vaccum). As far as I know, everything else is emissions stuff. Good luck. It's good that you got all the parts first, I kinda put mine together piecemeal and it was not much fun at all, but it was worth it. You're gonna like this carb.

 

[Platsmith]

Thanks for the info but I don't have the air injection system I have the pulse air system with no air pump. Any help will be appriciated. Thanks
Randal

 

[SenorCole86]

Oh oops, I'm sorry about that.