Recent content by FLLawdog

Best, by far, mud terrains, safari top and mirror relocators. Can't really think of a worst I've bought, but there are items out there that just look like they bring the suck.

Spread the word to 'em!

Should work, but something that hasn't been said yet is the rear axle. The Dana 35 is weak and 35's can add extra strain, especially if you wheel hard.

Doubt you'll get 35's under there with only a 2.5" lift without some serious fender cutting. The 4" suspension/2" body will get you there. BUT...the more you raise the body, the more chances you have of misalligning other things like shift/T-Case linkages. Plus, it will misallign your fan and...

3.75"-4" should do it. How much lift do you have?

The drawback to Rubi rims is they are 16's which will hit you in the wallet a little harder. They had 245/65(?)/16's, which equal about 30-31. Stock rims are either 7" or 8", depending on the style. If you have the Canyon/Ravine, they are 8". The drawback to that is backspacing. Stock rims...

Yeah...what ^ he ^ said. Your YJ has a 5 X 4.5" lug pattern. With a, say 33 X 12.5 tire on a 8" rim with 3.75"-4" backspacing, you shouldn't need spacers. That's the most common set up out there. Steel-little more durable and can be trued if the damage isn't awful (from my research anyway)...

Intra-Pod Audio Console by Select Increments and Other Jeep Parts and Jeep Accessories by 4 Wheel Drive Hardware-RH1 Probably not the cheapest, but it looks like a nice unit. Outside of building one yourself (wood, old ammo box, etc.), this is probably the next best choice. The TJ console...

I use Tuff Stuff. You can find in the automotive cleaning section. Not too expensive and works good. If it's a vinyl interior, you can use just about anything. I like stuff that foams becuase it lifts the particles up better.

The plastic and rubber is probably rusted, too.

Rip out the carpet if there is any, pull the drain plugs and spray away. If it's that bad, take the seats out to make sure you get the nooks and crannies. There's usually no need to spray the dash directly, but it can handle the mist and overspray. Just stay away from things like aftermarket...

Is that the hot rod black from Eastwood's? If so, got a ton of questions because I've been pondering it for my TJ.

Re: Quick Update on my TJ project Loving that color. What color is the body?

When you gbet to the map, look in the upper right hand carner, You'll see a bar that says "link" or something like that. Copy and past the entire thing and post it as a link on here. DON'T copy and past the address at the very top of your browser as the only thing that will link is the view of...

Because Jeeps were retro before retro was cool.