Search results

ecor, I'm headed to Ft Drum to do some demobilization outprocessing. I hear theres like 7-8' of snow on the ground up there. Is this true? I'll be leaving at 0700 tomarrow(sunday) and returning on friday. od

Godspeed and good luck graewulf. Hope u get to bring her home soon. od

Is this oil pump wear thing common on most AMC 6's and 8's? I used to have a 79' CJ7 with a 360 that came from a 79' waggie which came from a 76' waggie and i never had any problems with it. It would start at 65, hot idle at 35-40, and run at like 50-55. It had a mechanical guage as with my...

Its supposed to be in the mid 50's this weekend here, you know, top down weather after a long winter. Unfortunately ill be leaving early sunday morn for the FT. Drum/Watertown region of upstate NY. Hope its not too cold up there! I'll be away from my baby sarah(jeep) for a whole week :cry: od

Snow? I've been looking into a SOA. Where do they sell these kits that you all have mentioned? od

I tried the AC delco filter and it made no difference. Since then, when i last changed the oil, i decided to add Lucas engine oil stabilizer and, seeing as how its as thick as molasses, it raised my idle pressure from about 11 to low twenties. It seems to work fairly well and it doesnt start...

If you have a voltage meter with the resistance(ohms) setting you could check the primary and secondary resistance of the coil to see if coil is bad. First disconnect the coil. Then, using the ohms meter, put one contact on the neg. terminal and one on the pos. terminal. The resistance depends...

Well, I finally did it. I put a rebuilt 258 in my 87' about a month ago. So far everything is fine so far except for a small oil leak. It would'nt bother me if it weren't for the fact that it gets on the exhaust. My first suspect was the rear main but i just replaced it with the rebuild while i...

I fixen on replacing the u-joints on the rear drive shaft of my '87 w/ 207 T-case. Anybody have any recommendations on a good strong u-joint? Also, is the NP207 a slipyoke like the NP231? It sure does look like it. Thanks for any help. od

I also used a bike shifter for my hand throttle. Works dandy. od

As u take the old cap off, note which place on the cap the rotor is pointing to. You could also use the dist housing as a reference to the rotor position. When u put the new dist in, put the rotor on and make sure that the rotor lines up on the new housing as it did on the old. After this is...

Im right at 50%. Guess that means i could swing both ways :shock: . Haha JK. od

Awesome vid! od

Thats a great idea tug, unfortunately i'll be at my inlaws :twisted: .haha od

TJ or YJ? od

What engine? What happens exactly? od

I've got a friend with a 2000 wrangler who wants to put a lift on his TJ. He is looking at spring spacers for his lift and/or body mounts. I've delt with body lifts before but not the spring spacers since ive only ever had CJ's and YJ's. What are their advantages? How about disadvantages? He is...

Id love to come, but i have duty that day. Maybe next time. :cry: od

Has anybody here ever seen a set of roller rockers 4 the 258? I know they make them 4 the 290-401 which, in my opinion, would probably work youd just have 2 extra. I believe they were 1.6 ratio. What do you guys think? od

Sound good to me! Makes things a lot easier. od