Search results

$87.00 a stick?!?!? Whatcha making them out of? They don't need to be chromoly or nuthin'. They're just doors.

Here's my '78. Unfortunately, she is in other hands now. Had lots of fun with her while she was mine, tho...

I have a Dana 60 rear axle with posi from a '70 Gladiator pickup. Not sure what the gears are, but it had a Buick 350 and TH350 auto in it. The brake shoes and associated parts are gone; they were rusted tight. I'd like $300 for it. I also have 2 computers from my '93 YJ with the 4.0 and...

Pretty much everything is a direct bolt-in. I bought an ax-15, transfer case, and new clutch from a '90-something wrangler for $400, Bellhousing and hydraulic setup from a '95 cherokee for $35(I wanted the external slave), pedals and steering column for $60, new flywheel for $100, new computer...

Yea, my '93 had an auto and 3.07s, and it was a turd. I put a 5 speed and 4.10s in and it turned into a monster.

Will seats from a '78 CJ 5 be a direct fit into a '73? I have a pair of lowbacks that someone wants to buy, but we don't know if they will bolt in.

All you should have to do is remove the two bolts that hold the slave to the bellhousing and it comes right out. If you're reusing the line, you'll have to drive out the two roll pins, one on the master and one on the slave. Be careful tho, cuz everything is plastic.

I knew there was a simple solution to this. Now to tear it all out again. Thanks for the help!

I have an '90 ax-15 that I converted over to an external slave. The throwout bearing is much bigger than the shaft, and is very sloppy. Now I think it has come apart. Did I waste my money? Or is there a sleeved bearing that fits tightly on the trans shaft?

Hauled my ex-wife once. Once.

Depends on what you're planning on doing with it. I bought my '93 with a 4.0, auto, 33" BFG's and 3.07 rears. After about two years the transmission started to shudder. I put an AX-15 in, but it was a lot of work and money. I'd wait 'til you find a good '94 or '95 with a 4.0 and a manual...

OK, that didn't help. Could my flywheel be off a hole? I didn't think about it when I installed the flywheel, but after some research I've found that it could affect the timing. I don''t want to tear it all apart again, but if I have to, I will. I'm not gonna do it 'til after I go to the...

Thanks guys I'll give that a try.

I knew when I started this swap that it wasn't goin to be easy, but wow, is it turning into a serious pain in the behind. I have a '93 wrangler with the 4.0 and automatic. I decided I wanted to put a 5 speed in. I found an ax-15 that was supposed to be from a '94(I wanted the external slave)...

It depends on how bad your body mounts are on the tub. I just finished putting a tub from a '92 on an '83 frame, and it took me about three days because I had to weld in new captured nuts on the bottom of the tub. If all (or most) of your body bolts come out easily, it shouldn't take too long...

I don't have a complete jeep, but I've got lots of cj parts. Hoods, grills, radiators, fenders, CJ 7 frame, axles, a 304(semi-rebuilt), roll bars, dash, windshield frames(1 with good glass), plus a lot more. I'm only about an hour north of you in Perry county. If you find a project and need...

Where do you live? I have a rolling frame from a '79 cj 7 that I sandblasted and painted in excellent shape. It needs the rear crossmember welded in and has stainless brake lines already installed. There is a 304(semi-rebuilt) sitting in it right now. I'd like to have $600 for the whole...

I scored a screaming deal on an AX-15 with bellhousing and transfer case from a 94 wrangler, with the intention of pulling the automatic from my 93. I'm having some serious trouble finding some diagrams to show me all the parts I'm gonna have to find. I don't want to start tearing it apart...

I have a 93 yj with a 4.0 and auto transmission, and I'm considering putting a 5 speed in it. Will the transfer case from my automatic bolt up to the manual? I can get both from the same guy, but I don't want to waste the money if I don't have to.

Thanks guys, that just saved me a lot of work and money.