I have a 4.0L 1994 Wrangler. Everything was running great with no problems. I installed a new deck in the dash, running a new hot lead to the fuse panel to get power. Radio now works, and it turns over great, but won't start.
I'm not getting fuel OR spark. I tried getting spark from the coil and a plug..Nothing. I disconnected the fuel line before the filter, and I'm getting no fuel. Checked all relevant relays, fuses, and grounds and they all appear to be good.
Any ideas as to what would make me lose fuel and spark at the same time? Bad sensor? Computer? Anything I could have fried while installing the radio that would let the jeep turn over but not start? Been troubleshooting for a week and I'm at a loss.
I'm not getting fuel OR spark. I tried getting spark from the coil and a plug..Nothing. I disconnected the fuel line before the filter, and I'm getting no fuel. Checked all relevant relays, fuses, and grounds and they all appear to be good.
Any ideas as to what would make me lose fuel and spark at the same time? Bad sensor? Computer? Anything I could have fried while installing the radio that would let the jeep turn over but not start? Been troubleshooting for a week and I'm at a loss.