Search results

I am putting a new clutch in my jeep and installed the flywheel, bolted it down and torqued the bolts. I then put the disk and PP on and bolted, torqued them down. NOW, this is about the time I realized the guy at the store gave me FLEX PLATE bolts for my FLYWHEEL. The flexplate bolts are 3/4"...

So I decided to do a compression test yesterday on the 327, (10:1 compression if it matters). I have never done one before so im looking to you guys for advice on the numbers. As I understand it, more than a 30% fluctuation between cylinders is telling you its getting wore out and needs a...

This applies to non computer controlled distributors. As many of you are aware, timing and vacuum advance is one of my favorite subjects, as I was involved in the development of some of those systems in my GM days and I understand it. Many people don't, as there has been very little written...

Just got this thing about a month ago. I really like it, but I have had the engine light come on three times. First was the second day I had it, it needed the heater core flushed out and after I got it all back together the engine light was on and ran like crap, some how I screwed up a coil...

I need some help from you guys.... I don't know what to do!! I have a chance to possibly own a 2000 jeep tj, 6" bds lift on 33's. A friends brother bought it and fell in love with it but it had death wobble bad, a week later he was pulling into his driveway and someone rear ended him. didn't...

A friends brother just got a 2000 tj 4cyl which he says has a 6inch lift not sure of tire size, probably 33-35". I haven't seen it yet, but he says it has a bad vibration from the rear when you accelerate. It does have a tcase drop, and I think adjustable control arms as my friend said he can...

WOW, Cincinnati News! A bear has been spotted in Clermont county and authorities are tracking it. We don't have bears here!!! They do boarder us over in WV but not near Cincinnati, OH. I thinks its awesome and hope more follow this one. Authorities say they think for some reason he crossed the...

If you want to see some wild wheeling, check out "southern rock bouncing" their all over youtube. I couldn't figure out how to post them. A pretty cool video is of the "$10,000 dollar bounty hill from hell" knowbody makes it. If someone can tell me how to post youtue videos I will post some.

I tried to take a pic and post it but didn't work. M.O.R.E offroad has offset spring plates that allow you to move your axle forward or back from 3/4 - 1" with no mods. I want to try them, and was wondering if anyone has ever used them or know of anyone that has, and if they worked ok. The...

I thought I would post this since I know there are a few older jeeps on the Jeepz. I think it would be a good time. Vintage Jeep Tour :: Home thanks

Does anyone know anything about a dana 41 rear cj axle? I had the early 44 rear and 27 front, both ring and pinions are toast. I bought a 41 rear and 25 front because that's the only thing around here I could find that would fit with no mods. The 41 is only 10 spline, and have read that you can...

came across this. I would love to have it. Well it didn't post the pic of it. Delete this post if you want. 1965 Jeep 4x4 CJ5 Tuxedo Park IV - $2495 (Frankfort Ohio) It looked pretty nice for 2400.

The rear end in my jeep is toast. Lost it the other night. So, it needs replaced or upgraded and im not sure which way to go. right now money is pretty tight, and it seems my options are: 1- Replace the axle with the same 2 piece axle early model dana 44, 2- get rid of the front and rear axles...

Helped a friends sister move yesterday, and she drives a infinity. We were leaving and she put it in reverse and the screen on the dash that had previously showed the air temp, radio station, and a few other things changed, and a picture of behind the car showed up with arrows showing the...

There were a couple people looking for advice as to how they could build more horse power from their jeep inline six engine. I had posted that jp magazine had done an article on building a jeep 4.0 to 558 hp but that I couldnt find the mag. Well, I found it, so if anyone would like the info on...

I am having problems breaking my alternator bracket in half. The motor is a 65 chevy 327, double hump heads with no acessory holes, roughly 350hp and around 412ft tq, every time I floor the pedel and run through the gears from 2nd to 4th hard it snaps the alternator bracket in half. I have...

Im pretty excited. A friend of mine got a 63 impala ss a few yrs ago in perfect condition, all original except the engine. He wanted it taken apart and redone. He has had two dif people start work on it and they both had personal issues come up and had to back out of the deal. he has had the car...

Probably a silly post but just wanted some thoughts or suggestions. The story. Months ago my starter started dragging and turning the engine over slow, It got to the point that I had to jump start it everyday because if it didnt start right up, it would drain the battery. Sometimes taking almost...

I have this issue lately.. I have a old 4150 series holley 650 double pumper 4 barrel carb with a manual choke on my jeep (I know, they suck off road). The throttle shaft has a nice vac leak so im adjusting the carb about once a week. The choke used to work fine, but now has no affect on the...

My friend just got a 94 yj, 6cly, 5spd. It had a few issues that we took care of, but two things are puzzling us. If you hold the brake down, you can feel it bleed down. We put new brakes and shoes and wheel cylinders but still does it. You can see where the booster had a leak at one time but...