Search results

Gee, I wish somebody knew about these things - I;d hate to buy it only to find out it won't work etc..................

A wise man once said "Become master of the obvious & you will be one of the smartest". Your seat can go back as far it has no obstructions! If there is a ledge it will bang into thats as far as it can go w/o raising it up which you at 6'7" don't want to do! If you slide your seat all the way to...

I was told that the 10th digit of the Vin # is the year of the vehicle! Thus if the 10th digit is a 2 the vehicle would be a 2002 etc.. The 10th digit of the wreck I just bought is a Y what year would that be??? Jim

I bought this 2002 or 2003 Wrangler that's been total'd out & now is a parts only Vehicle. I'm going to remove the couple of things that I need and than let somebody else get the parts that they need etc....... How do I tell if its got Dana 35 or 44 rears? What ratio rears is most common for a 4...

Yeah I took some photos and sent them to my daughter in LA & she's making me a list of what she needs/wants! Her boyfriend drives the jeep & she has a 2006 Hummer. I don't know how to put them up here or I'd show you what it looks like - The parts car that is!

OK nobody gave me a figure so I offered him $300 & he said OK The front is history - The springs & rotors & such seem OK The Trans looks OK but he said the T-case is cracked Rear Rear looks OK but The front rear has yet TBD Lots of things are questionable but my son wants this type roll bar for...

I have an oportunity to maybe pick up a 2002 Wrangler which is just a parts vehicle. I want to make the gent a fair offer but I don't want to overpay for it either. 1st of all it was hit big time square in the nose! Most of the sheet metal up front has been removed but nothing could have been...

Roller bearings are nice but if push comes to shove any good machinest can make you a brass bushing that will work just as well. Someone that can read a micrometer, calipher & veneer loves these kind of challenges. He has to measure the diameter of the hole in the crank to determine the diameter...

I need to get a new shaft. Guy on eBay selling on says that his shaft is from a vehicle that had Power Steering & will not work on a vehicle w/o Power Steering? Is this true? There's a difference in this shaft? Please advise Jim

Here's the facts of the story: * Installed a Complete 2004 Wranggler 4.0 engine, Trans, t-case, computer & engine wiring harness into my 89 Wrangler. * Speedo won't work because its cable driven & not electronic! * Purchased a 1994 YJ Speedometer / Tachometer Cluster complete with flexible...

I think that your finished! I know you've spent a hell of a lot more time & energy than I would have. I'm turning wrenched for over 50 years and I can see knocking off the obvious carbon build up and hitting the face with a little sandpaper so that it allows the gasket to do its job. I'd finish...

Hay - This might be an add-on! I can't be sure because the Wrangler is over at my buddy's garage, we're still playing with trying to get the speedo & tach working plus fuel pressure regulator wooo's! Anyway, I'm looking at this (Beautiful Leather Commfy) 60/40 type back seat that I pulled from...

Oh, I don't want to mislead anybody - I didn't use the power seat mechanism that would have mde the seats sit much too high! They are a little bit higher than the Wrangler seat but because they are softer I think you sink down & the end result is near the same driving height. Jim

This is good news to me so I thought I'd pass it on for what it's worth. 1st off the seats in my 1989 Wrangler aren't in the best of condition. I've been looking at seat covers but good ones are expensive & there still covers. The seats themselves are a little bit to firm for my tender butt -...

Trying to install a speedometer / tachometer cluster into my 1989 Wrangler. We put a "Complete" 2004 Wrangler 4.0 drivetrain (Motor, 42RLE Auto Trans & NV T-Case) We also used the 2004 harness & computer. Here's my problem: The old Speedometer won't work because its cable driven. I was told to...

The cluster is from a 1994 Wrangler YJ ...... It's the same size etc just the 89 was cable driven & I need an electroic one to work with the 2004 trans & t-case etc.

[B][U]Next Chapter in the Saga: All the Problems putting a 2004 Wrangler 4.0 w/42RLE & NV231 into an '89 Wrangler that was a 4.2 Five speed! I bought a 1994 Speedometer Cluster on eBay because the 89 speedo was driven by a cable & I needed one that is electronic. Now that I have the electronic...

Hay don't bother yourself! I couldn't take the suspense so it was simple........ I pulled the pump out. So now I know what's what! I had to pull the pump anyway because I replaced all the original Jeep instrument panel gauges with Sunpro White faced mechanical gauges. I never had much luck with...

Next saga in my quest to get this 2004 4.0 running right in my 1989 Wrangler. As you may remember, I purchased & installed the Late 80's Ford (Big Truck) type E2000 Externally Mounted Fuel pump to supply this 4.0 with the pressure it needed (like 49.2 +/- 2) per the specs........... well it put...

Reverse situation, see if this can help: I bought a 2004 Wrangler 4.0 etc and put it in my 1989 Wrangler. I also put in a 2002 Wrangler radiator which I bought from a different guy. The 2004 engine came with the radiator shroud. I used the 2004 shroud only because it had some Danger or Watch...