Search results

So I regeared my Cherokee to 4.10s and my speedo is way off and I'm ready to buy a new speedo gear but here's my problem. My Cherokee is a 2wd . Usually the year is in the transfer case so I need to know of the gear in the tail of a 2wd ax15 is the same for the transfer case. If anyone knows I...

So o tore into my axle today I'm pretty sure is a Dana 35 I got to work cleaning up the gears and stuff before I pulled it out because I'm changing to 4.10 gears and a lunchbox locker. It wasn't until I started cleaning the data tag to confirm what I had and I noticed the ls stamp. I looked at...

So I messed up. I bought a powertrax locker carrier and ring and pinion the other day on Craigslist and was in a rush so I neglected to make sure all the parts were right. The locker fits the carrier but the ring gear doesn't match up. So how can I tell what gears I have and what carrier/locker...

The blinkers and horn on my 93 xj arnt working..... It's not fuses and connections look good. I would like to have them working in la traffic ha..they Havnt worked since I bought it

So I'm dealing with something I never thought would be a problem down here in sunny California... My floor pan on the passanger side has a 2"x4" rusted out area.. how do I fix it and should I check for it other places? Can't really see it. just happened to hit it with a wrench while I was under...

So 2 months ago I rolled my jeep. 93 xj with 4.0 manual trans $750 Many emissions parts $300 Rebuilt the head and valves $250 Misc. Sold parts from 97 xj $450ish Cash lost after fighting smog aprox. $1000 Results

Okay so I've been thinking... My xj runs a bit warm even tho I have a 180 tstat a new pump and 2core aluminum radiator. I keep the electric fan running and url get up above 215 while driving highway. Now I have a factory trans filler from an xj I rolled and am considering putting it on this xj...

Last week I rebuilt the top end of my 93 Cherokee 4.0 and I busted the temp sensor on the back of the head. I bought a new one and installed it and its reading a temp of around 230 on my gauges. I have am infrared temp gun and it reads 180 ( my t-stat temp) everywhere including the t-stat...

93 xj starts up and the moment it starts it dies. I previously replaced the map sensor, tps, fuel pressure regulator, fuel filter, dist.cap and rotor, spark plugs, Cleaned the iac, and have been running injector cleaner through the fuel system. Today I replaced all clutch components dues to an...

..

I bought a 93 Cherokee. It has the ax 15 with internal slave. The problem I'm having is getting the clutch to stay working. I've bleed the system and it will work just enough to where I can use it and shift into first. But after some driving it gets worse and worse until I can no longer put it...

So I wrecked my 97 Cherokee. Bought a 93 and both the throttle position sensor and map sensor are bad on the 93. I know the plugs are different but could a little wiring be done to swap the larger bore throttle body from my 97 that has the map sensor on it to the 93?

Rolled my Cherokee today :/ I'm fine with no scratches fotunately but my jeep is k.o.

I just want to paint my fenders to match. All I can find is touch up stuff for scratches and what not.

So. Got in my xj this morning to head to class and well its idling pretty high... It was about 1500 rpms when it was cold but once it warmed up it idled real rough at about 2k... After class I plan to take the throttle body apart and do all the normal cleaning that everyone suggests. But when...

Exhaust leak? Where I don't see it :)

Sooo I've been doing a lot of research on building my own long ARM system. Ive been fabricating for about 4 years now and am working towards my getting a welding cert in LA. I figure I can do it pretty easy. I plan building the generic 'y' link style radius arms using 2" OD .250 wall tube for...

Well its been doing this as long as I've had it and I've ignored it.. but when i first start it up it will turn over quite a bit before it starts and then once it has started it will sputtered for a few seconds like half the cylanders aren't firing. My throttle body is clean and I've used fuel...

So my cousin found this link and it sounds a little crazy but I'm thinking of trying it. What do you all think? http://jeep-xj.info/HowtoRadiatorRestrictor.htm

I'm building a 2wd desert fright and have bought a 4.3 engine and trans.. I would like to use a Dana 35 or Ford 8.8 rear end.. my jquestion is is there any stock drive shaft that will fit directly between my 27 spline 4l60 trans and rear end? Or is the another axle that will ? I need an axle...